2004 Arden Blue TS Astri SRi Turbo
It is normal, but hitting 23-24psi then dropping back to 19 is too much for traction and getting outside the safe range. So backing it off a bit.
Sent from my Nexus 6P using Tapatalk
I am aiming for 20-21 psi then hold 19.
Sent from my Nexus 6P using Tapatalk
The ones I listed are all made in the same factory in China, if you look for the gpi racing ones on eBay you can get them cheaper that buying the TX even before you factor in shipping. If I was doing it again though I wouldnt have bothered as they all need some slight modifications as the turbo outlet from the cooler is 1mm too small and to not leak you need to wrap it in silicone tape or get the clamp super tight.
Sent from my Nexus 6P using Tapatalk
Cheers for the info sammich Will start saving for pwr rad
There are currently 39 users browsing this thread. (0 members and 39 guests)