Originally Posted by
chris_r
It may be possible that the C16XE/X16XE pot-type flywheel and clutch could be a direct bolt on (Astra Z18XE also uses the same flywheel, but the clutch is different due to the Z18s hydraulic actuation). But, I would find it hard to believe that a C14 or C12 would have the need for a HD clutch. Even most replacement aftermarket clutches these days have up to 20% higher clamping loads than what the original clutch would have if it were new. If you want reasonably priced and decent quality clutches in SA, try Australian Clutch Services at Wingfield. It's on the corner of South and Cormack Roads. They'll supply clutches and machine the flywheel for you, but you will have to go somewhere else if you want it fitted.