QSZ products and prices for all

[FLY-SRi]

hey guys, i been talking to qsz recently about upgrades to my SRI-T, they sent me there performance list if any1 wants to take a look see,

QuattroSport
Zentrum Pty.Ltd

Holden Astra Turbo Performance Options



Highflow Airfilter

• Allows car to breather better giving more power
• Fits into standard air box
• Washable element so it can be used over and over
• No modifications necessary to fit.
• $155



BMC Carbon Dynamic Airbox

• Neat carbon fiber design
• Rams cold air straight into your engine giving much better throttle response and torque
• Increases performance over standard air box while maintaining excellent filtering properties.
• Washable element
• $595



AmD Serial Port Chiptuning
• Downloaded straight to your ECU, no soldering.
• Provides big kilowatt gains with corresponding increases in torque.
• Comes with before and after dyno charts at our Melbourne office.
• Dose not affect servicing parameters.
• Can be removed at ant time and returned to standard.
• $1495



Eibach Sports Lowering Springs

• 30mm lowering.
• Reduces body roll and provides a more sporting road holding solution.
• From $555







EBC Kevlar Sport Brake Pads

• Increase's braking power
• Reduces brake dust
• More pedal feel
• Work fine from cold
• No increased disc wear
• GreenStuff front - from $200
• Standard rear – from $115


EBC Turbo Grooved Discs
• Increased stopping power
• Stops brake fade
• Will run to 900 deg without warping
• Front – from $210 each.




All prices include GST.
All prices do not include shipping or fitting.
All prices are subject to variation.
All quotations are valid for 30 days


.
they also said
" We have only just got our equipment last Thursday so we have not done any local cars as yet, but we have about 10 back orders. Will start as soon as we have the local spec data checked by AmD this week.

I will have charts as soon as we do a car here.
from what AmD say it should be 190-200kw and 350Nm.


Simon
QSZ "

Is this really possible for stock engine with just AMD chiptuning?

Warning: This is an Old Thread This discussion is older than 120 days. information contained in it may no longer be current . Please think of the children before resurrecting this ancient thread!

[Jass]

The figures are more towards the 185kw -190kw without any other mods, place a few more kw with a decent exhaust system (dump pipe high flow cat) and a good intake and you should be able to squeeze a few more ponies out of the car close to 200kw maybe a bit more. :mrgreen:

[OPL-20T]

yes it is possible and thats what many people like c&v performance and amd & sas are saying. 200kw can be reached by a good tuner. and sounds like a good potion at the moment as its been around in the UK for ages and its gotten good wraps over there.
i spoke to qsz today 14.04.04 and they said about 185kw to 200kw with no mods, they will be up in sydney next thurdsay or friday to do the sydney cars here.

$1495 for the ecu upload. not sure how long it takes.

[Nem]

BMC Carbon Dynamic Airbox

• Neat carbon fiber design
• Rams cold air straight into your engine giving much better throttle response and torque
• Increases performance over standard air box while maintaining excellent filtering properties.
• Washable element
• $595

Well it's cheaper at autospeed

Cheers
Ben

[My04SRi]

Will they have a list of performance kits for the barina SRi?????
yes? :arrow: :mrgreen:
no? :arrow:

[FLY-SRi]

umz im not sure :?: , email them, thet seem pretty nice

[thingo]

I emailed them last Monday about Barina mods, I guess they have been to busy to reply to me..... :?:

[Turblue]

Have I got news for you....

Well, I had a visit from Simon from QSZ. Yes, that's right..!!!! Turblue.

Simon contacted me in order to get the ECU data for an Australian SRi Turbo. This data will be sent to AMD in the UK for comparison to the maps in use there. Any changes that need to be made for local conditions will be taken care of at this stage.

At this point the story is as previously mentioned:

AmD Serial Port Chiptuning
• Downloaded straight to your ECU, no soldering.
• Provides big kilowatt gains with corresponding increases in torque.
• Comes with before and after dyno charts at our Melbourne office.
• Dose not affect servicing parameters.
• Can be removed at any time and returned to standard.

$1495

Simon was kind enough to stick around for a bit and discuss/chat his service. He indicated that the maps are within tolerances for the car. Should the maps cause issues in terms of (ECU) running, the car would be returned to factory (they store your maps) and fix the issues. Then they would upload the new maps.

When asked about mods, Simon indicated that there was no need to create new maps. It is recommended that the only mods required for the SRi T are catback, better intercooler and better intake. If I understand Simon correctly, AMD suggest no more than this. The ECU in the Astra is clever enough to take into account these mods on its own. Hence no new maps.

Just something to consider...

I paid $600 for a catback that gave me 4hp. That's $150/hp.
Remap is $1500 and gives about 50hp. That's $30/hp.

I am hoping to meet again with Simon and "play".......

Many thanks go to Simon for his time today.

[DrDevil]

I emailed them last Monday about Barina mods, I guess they have been to busy to reply to me..... :?:

for what model? SRi?

[Jass]

The Turbo my friend. BTW Wayne when you speak to him next ask him what happens if we have a dump pipe and no pre cat on the car, specially since we know now that with a full turbo backed exhaust the boost goes up by around 2-3 pounds!

Also how much boost is the car running on 186kw- 200kw?? Is there any change if any?? All this things come into account, no two cars are the same.