Dyno Results

**mr_sikma** · 18th January 2006, 09:59 PM

**Shaun** · 18th January 2006, 11:29 PM

Originally Posted by mr corsa

heres my dyno results @15psi but only revs to 7100rpm due to electrical interference and by the way its a sri corsa-c and another thing this is my lowest dyno result

WOW... Impressive Tony. Congrats.

**Shaun** · 18th January 2006, 11:43 PM

Glenn Suggestion if i may? can we make a Spread sheet up for this ? ill draw one up and send it on email. then host it somewhere so it can have info added. Also wayne can we have a Motorsport Section added to forum of all TRACK events . IE off street drags track days etc.

**mr corsa** · 19th January 2006, 09:07 AM

5 dynos from nsw
1 dyno from vic
wheres the rest of the dyno results?

**Dee** · 19th January 2006, 09:10 AM

am i allowed to put up my stock rolla stivo results???

**Mr T** · 19th January 2006, 09:12 AM

Sikma: yeah 50PSI is a standard, all dyno's should be run on 50PSI tyre pressure. Also need to sight the signed Dyno (refer 1st post for details)

Shaun: I had thought about the speadsheet but it wouldn't be a working document, so I would have to constantly make adjustments, save as jpg and then host it. Makes for a lot of stuffing around.

**Mr T** · 19th January 2006, 09:13 AM

Originally Posted by 11-SXI

am i allowed to put up my stock rolla stivo results???

SSS_Hoon is up there...you are more than welcome.

**Dee** · 19th January 2006, 09:32 AM

11-SXI
05 Corolla Sportivo
1.8L na - stock
4th gear
not sure what the rpm was at the peak... where it starts to go up is 6000rpm tho... i can rev out to almost 9000

Click here to enlarge

the bottom line is the air fuel ratio... we didnt have torque measured on that day

**auzvectra** · 19th January 2006, 09:50 AM

i have the dyno sheet, been posted a few times in different threads, but it aint in shootout mode and dont know what the tyre press was, bout 45ish i think.
but it was 121kw and 14.69, but will have to get another dyno a bit later in shootout mode.
hopefully after it's runnin a little less rich.

**OPC** · 19th January 2006, 10:15 AM

Originally Posted by Mr T

^^^^^Dave and Jay ^^^^^

Need 4th gear fellas

If you dont have a 4th gear run get your arse down to Minchinbury on the 28th

just because ur dyno sheet was done in 4th why does everyone elses hafta be in 4th ?

i know u know mine was done in 3rd cos u were there on the day...whats the difference...

145kw@wheels/[email protected]...

Thread: Dyno Results

Thread Tools

Display

Thread Information

Users Browsing this Thread

Posting Permissions