Astra G SRi-T wheels

[adam_92]

I have scrubbed a little bit. Only with a completely full tank of fuel, sub in the boot, a shit load of electrical cable in the boot and back seat for work and 2 18" wheels and tyres which are punctured. Even then I only scrub on big bumps/dips in the road.

Sent from my GT-I9505 using Tapatalk

[faneca]

I have scrubbed a little bit. Only with a completely full tank of fuel, sub in the boot, a shit load of electrical cable in the boot and back seat for work and 2 18" wheels and tyres which are punctured. Even then I only scrub on big bumps/dips in the road.

Sent from my GT-I9505 using Tapatalk

Also worth noting that they have the ah tyre size on them still which is bigger than the ts.

[Raisin]

If your hard pressed I'm selling my old VXR 19s too @adam_92 has two on his SRiT because of all the flats he has been getting and said he hasn't had any issues with scrubbing. He has b8s and eibach sportlines (50/30) so may be an option not sure how much work you would need to do on the front.

Thanks for the offer, but I really want to stick with 17's for the car. If I could get a set I like the look of in 17x7.5 5x110 ET49 I would buy them in a heartbeat and slap some 214/40R17 tires on it and be happy, but so far it has proven difficult. A few are close matches but miss out on checking 1 or 2 boxes so it's just a matter of finding something that's close enough to the original dimensions that won't be an issue with any scrubbing or fouling.

[faneca]

No worries mate. Any particular brands your after?

[adam_92]

Team dynamics will customize wheels to your perfect offset, pcd and they have heaps of sizes and widths too

Sent from my GT-I9505 using Tapatalk

[Raisin]

No worries mate. Any particular brands your after?

I have looked at Enkei, Rays/Volk, 5Ziggen, Work, OZ Racing and BBS. I either couldn't find a design I liked or else the wheel wasn't offered in a suitable spec. Some of them are admittedly hard to check out with poorly setup sites and spec sheets in another language or vague at best. So I may still hunt a bit deeper and try find if something will work. I will post up some designs later on with the style I'm after.

Team dynamics will customize wheels to your perfect offset, pcd and they have heaps of sizes and widths too

Sent from my GT-I9505 using Tapatalk

Thanks for the tip! I will have a look at their stuff now.

[indoctrine]

Thanks for that, Guy. I went off searching for fugly rims.

[adam_92]

Also have a look at ozzy tyres. If you find a set of wheels that you like they get blanks and drill them to a 5x110 stud pattern

Sent from my GT-I9505 using Tapatalk

[mickos]

I looked at ozzy tyres before I bought the TDs, XXR do a few sweet rims lightweight too

[Raisin]

I think I'm going to contact these guys http://www.amgaustralia.com/ and http://www.jdmwheelimports.com.au/ to see what I can get through them. I don't know if they'd be able to get me blanks of one of the ones I like. Otherwise I'll also be looking at Team Dynamics, I know a few of you have them though so I don't want to jump the gun and copy you guys too quickly.

These Enkei PF01SS in Matte Black would be my first choice.
http://www.enkei.com/pf01ss.shtml

Closely followed by the OZ Racing ALLEGGERITA HLT in Matt Black
http://www.ozracing.com/car_wheels_v...HLT/25619.aspx

I really like the pinched 10-spoke design of the Enkei ones though.