Reply With QuoteDepends if you really need on. They are oe on a fair few vehicles. That place is where my replacement oil cooler is from
Hey guys looking at getting one of these for my celica, anyone used or know if they are any good?? By what ive read lots of hotrods and v8s use them so can't be that bad right??
heres example or one
http://vpw.com.au/productgroup.asp?C...&PrdGrpID=4858
thinking about one as dont have much space to work with
Warning: This is an Old Thread
This discussion is older than 120 days. information contained in it may no longer be current . Please think of the children before resurrecting this ancient thread!
Depends if you really need on. They are oe on a fair few vehicles. That place is where my replacement oil cooler is from
Track Times: Phillip Island - 1:59.4027, Calder Park - 1:08.8142, Winton 3km - 1:40.7810, Sandown - 1:29.6000, Haunted Hills - 62.55, 1/4 Mile - 13.736
well the g/box had one in the radiator before stock and has all the piping leading nowhere so have to put one in.. new custom radiator has no oil cooler so need one to fit
edit-
VPW is where i went for a job, but i didnt know enough about pushrod engines only modern engines so didnt get the jobahha
Last edited by gmonkey; 23rd February 2012 at 04:40 PM.
those aren't really that effective for cooling...
those fins are tiny for the job
but if you can't physically fit a traditional oil cooler, it's better than nothing... it's just not as effective
'03 Arden Turbo "Tegan"'15 Fiesta ST "Tiffany"
they have the same surface area as a traditional style cooler. The fins really are no different to fins you find on standard ones except they are rolled into a circle rather than stacked..
If it had one stock, i'd put one in for piece of mind. Can't hurt. Same reason I have an oil cooler on my car.Originally Posted by gmonkey
well the g/box had one in the radiator before stock and has all the piping leading nowhere so have to put one in.. new custom radiator has no oil cooler so need one to fit
edit-
VPW is where i went for a job, but i didnt know enough about pushrod engines only modern engines so didnt get the job
Track Times: Phillip Island - 1:59.4027, Calder Park - 1:08.8142, Winton 3km - 1:40.7810, Sandown - 1:29.6000, Haunted Hills - 62.55, 1/4 Mile - 13.736
Like thats a waste of money. I sure I can find you something that would do the job, The cars still in perth right?
yeh man cars still over there up on jacks and no engine fully in yet..
space between radiator and engine is about 5cm, and i still need to put fans and piping in there
best to put it in front of the radiator anyway. even a heat exchange from a FG would be better than that. when your back over here let me know and I will find something for you.
cheers nigel
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
