Thought it was time to introduce myself to Opelaus! Cracking forum, lots of information and keen members.
A few of the Opelaus members will know me as Docvauxhall, as this is the UK based business I run which sells various modifications for Vauxhall, Opel and Holden models and they have bought our products.
I don't want to make this sound like a sales pitch, so I won't go any further with what we sell, but if you ever need support or advice for our products, now you can PM me for advice and I can contribute to any threads on the forum too.
My personal cars are:
Vectra B 2.0 16v (X20XEV) SRi 140, which has been rebadged as an Opel, running with 18" wheels, slammed (-100mm) suspension, Irmscher styling and Magnex exhaust system. That's meant to be the runabout, but it's currently in the workshop nursing a broken cambelt and bent valves (so much for cambelts lasting between service intervals)
Astra Sri Turbo (UK Spec Z20LET) This is our project car, meant to be a summer car and used for track days and drag strip. Spec is massive and increasing by the day!!
Bodywork: UK OEM Prodrive bodykit with Irmscher bonnet extension, Irmscher grille, upper tailgate spoiler and rear lights, custom modified projector headlamps with dual Xenon HID lights. Bonnet bra for road driving to keep the stone chips down
Chassis: Eibach sportline springs with Spax 28 point adjustable dampers. Powerflex polybush wishbones, Whiteline ARB front links, Whiteline rear ARB, Drilled discs all round with custom Porsche 4 piston front brake caliper conversion
Engine: Z20LET block with Mahle low compression pistons, ARP bottom end bolts, X20XEV breather modification. Z20LEH head with Kent exhaust cam, Kent uprated valve springs, double thickness stainless head gasket, Z20LEH 440cc injectors, Z20LEH AMM. Z20LEH turbo unit with 9 litre SM EDS intercooler, aluminium airbox top, derestricted airbox with Vectra C enlarged intake pipe, Milltek decat pipe, Milltek full cat back exhaust. Aquastealth Water/Methanol injection system. HKS SSQV blow off valve
Transmission: EDS shortshift linkages and LMF short shifter, reduces throw by 80%, Helix 4 plate paddle clutch. Original open diff.
The car is gonna be off the road soon for more work shortly (once the Vectra is fixed) currently running with around 310bhp and in excess of 287lb of torque (the standard clutch slipped on the dyno at this figure when we last had it dynoed)
Next battery of modifications are:
Garrett GT2871R turbo, custom exhaust manifold, decat downpipe, full exhaust decat, AFR gauge, decat remap and rerouted induction system
Hoping to map it in at around 350bhp, although it should be capable of 450bhp, the transmission and driveshafts will probably not survive for very long. The car has our hi/lo boost controller, so we have standard boost 90% of the time and use the full power to wipe the smiles from Porsche/Subaru/Mitsi EVO drivers' faces the rest of the time
Warning: This is an Old Thread
This discussion is older than 120 days. information contained in it may no longer be current . Please think of the children before resurrecting this ancient thread!