Reply With QuoteGave her a good spit and polish last night
Do they come with blue stitching?
If so, where and how much?
:: OpelAus Senior Moderator ::
:: OLD: 2000 Opel Corsa B 1.4 - Old info here - 48.7kw atw
:: OLD: 2003 Opel Corsa C SRi - Old info here - 84.8kw atw
:: OLD: 2003 Opel Astra SRiT - 182.3kw atw
:: Daily: 2001 E46 BMW 325Ci Coupe – 2.5L 5spd Manual
:: Project: 1983 AE71 Toyota Corolla CS-X - not sure what to do yet... ::
www.pauljakubicki.com
facebook.com/PaulJakubickiPhotography
Event Photographer/Writer for SpeedNation.com.au
Gave her a good spit and polish last night
FG F6 310 + Peri Peri = 406kw & 890Nm atw
1/4 mile 11.7 @ 119 mph on factory 19" Dunlops 10/08/11 WSID
Here mate.Originally Posted by PaulyJ
http://www.ebay.co.uk/itm/VAUXHALL-O...item4152db1ed7
They are vinyl - Cut for perfect fit - Quality is great - Fast shipping too.
Awesome, thanks mate!
:: OpelAus Senior Moderator ::
:: OLD: 2000 Opel Corsa B 1.4 - Old info here - 48.7kw atw
:: OLD: 2003 Opel Corsa C SRi - Old info here - 84.8kw atw
:: OLD: 2003 Opel Astra SRiT - 182.3kw atw
:: Daily: 2001 E46 BMW 325Ci Coupe – 2.5L 5spd Manual
:: Project: 1983 AE71 Toyota Corolla CS-X - not sure what to do yet... ::
www.pauljakubicki.com
facebook.com/PaulJakubickiPhotography
Event Photographer/Writer for SpeedNation.com.au
I've got a blue and black suede one that just came off the car that is no longer being used if interested mate...
Epsilon Renntech
2003 Astra SRi-T - The Phantom
EMTRON ECU
Borg Warner EFR7163 & EFR9180
Tuned by Scott @ Insight Motorsports
Went for a drive up Mt Glorious after a 10 hour shift at 4pm to try out my new shift lever. In the rain. Dumb huh?
It's not a Holden. It's NOT a Holden. IT'S NOT A HOLDEN!
Just ordered a Tomei FPR for the GSi. Getting my backside to wrecker tomorrow to get some more bits so I can wire in the Z18's ECU. Yes, I know it's fly-by-wire, but that's not really that hard to sort out.
2001 Opel Corsa C SRi: Z20LET EDS stage 3.5 173.9kW @ the wheels Build thread and here on FB: http://www.facebook.com/corsasriz20let
2018 Ford Transit 290S: Transit #2, in that order and it's also a POS
1998 Opel Combo B: It has begun, and it's stalled - Build thread and FB page
2009 Holden Commodore VE SS: Gen IV LS power for the inner bogan
Pulled out the glovebox, pulled out the empty din slot, then swore non-stop for 30mins at the stereo for not coming out......
Put it all back in the garage, went upstairs, and swore non-stop for 30mins at myself after checking the interrnets only to find out that the Blaupunkt isn't "attached" the same as other stereos.
Anyone want a Blaupunkt h/u.....
Last edited by ZomBie; 24th March 2012 at 11:02 AM.
Got the engine wiring harness out of the GSi after a bit of swearing. Half fitted the Z18XE harness, just need to get the rest of the harness, which will happen on Monday hopefully, just as long as the slackers at the wrecking yard get motivated.
Also, gave the iLoad some new brake pads (Bendix Heavy Duty), as after 90,000 they were getting a bit thin, especially on the rears. Can't believe how easy it is to work on this van and yet the morons at Maughan Thiem would've wanted a fortune to do that. Cost $160 for both front and rear pads and about an hour and a bit to do. And at least I know it's done properly.
2001 Opel Corsa C SRi: Z20LET EDS stage 3.5 173.9kW @ the wheels Build thread and here on FB: http://www.facebook.com/corsasriz20let
2018 Ford Transit 290S: Transit #2, in that order and it's also a POS
1998 Opel Combo B: It has begun, and it's stalled - Build thread and FB page
2009 Holden Commodore VE SS: Gen IV LS power for the inner bogan
Washed the car for the cruise tomorrow and I bet any money it'll rain tonight. The neighbour already decided to mow their lawn and grass clippings are flying everywhere
Silver 03 SRi T -derestricted 2.2 airbox;total closure;ECU remap (EDS Stage 2 - 260 ps);breather box;Angel Eyes;Veccy Intake Scoop;FMIC;Inlet Cam;3"TBE;82 degrees thermostat;VXR Turbo;short shift;Team HEKO Wind Deflectors;Eibach Pro Kit;Whiteline RARB;Slotted Rotors with RDA Extreme Pads
There are currently 154 users browsing this thread. (0 members and 154 guests)
Posting Permissions
