Debadged this morning. Might wash but knowing my luck will rain.. Dam black car syndrome
windows tinted, paint touch up, put stock door handles in.. ordered some parts
- Wrecking Ts Astra City Hatchback / Pm me -
Debadged this morning. Might wash but knowing my luck will rain.. Dam black car syndrome
Agree with everyone else, 50psi is way over the top for your wheels there - hope you've dropped it down to say about 34-36psi max.
You'll definitely have a case of 'concavity' on your tyres and cause uneven wear on the tread centres...
You'll also be at a much higher risk of a blow out and leaking with such a high pumped up pressure...
I'm running hi performance 30series tyres on my 20" rims, these are the sort of tyre sizes/type that require the highest operating pressures and they're set at 40psi max. just to give you some idea for comparison
My rides: 2004 Opel/Bertone TS Astra turbo convertible - 2012 Mercedes Benz C204 C Class coupe
Others: 2009 Honda City VTiL sedan - 2015 Fiat 500
well the guy at bobjane said 50-52 psi.. 40ish seems too low (worried about the alloys)
- Wrecking Ts Astra City Hatchback / Pm me -
what size and profile are you running?
i ran 38psi in mine, 215/45 17
2013 Ford Focus ST
Calibra - The only car that will institutionalise you and send you broke in the mean time
are your tyres XL tyres darkirv and larger than the stocks? cause i mean no matter what psi you put your car upto chances are your load limits of your tyres will never handle what the stocks could, if your tyre distrubutor has put non XL tyres on your low profiles it will cause less life in your tyres, less traction and chance of pre-mature blow outs.
But if your tyres are XL tyres your PSI levels shouldnt differ from your stocks PSi levels as yes there is less diameter to your tyres, but the width contradicts this, making total Air Volume almost the same.
back OT, debadged my car just then hope AusPost hurries up with my badges/stickers/eyelids . also changed my MFD to blue/green coloured. Now to order steering wheel dome badge and opel engine cover
Bobjane prob said to torque your wheels to 200nm too
40psi to LOW!!!! Seriously, WTF!!!
Standard pressures on normal tyres are 28psi to 34psi!!!!!
Sports tyres 38psi to 40psi if you really want to have the sidewalls stiffened up for some reason...I run my current 215/40/17's at 38psi...My race tyres at 34psi front and 36psi rear...And yes, the 2 extra psi makes a HUGE difference....
Race tyres on things like Porsche GT3's, V8 Supercars etc...Between 25 and 35psi....
At 50psi, you're over inflating the tyre by about 20 to 25%!!!!!
They will likely last 5000kms before the centre of the tread starts to show serious signs of wear, they will overheat and weaken the carcass as well as having no give at all the first thing you hit with a sharpish edge wil slice right through them instead of it giving a little...
As said before, I ran 215/35/18's and they are one if not the lowest actual profile tyre available (actual sidewall dimension/thickness) and I never ran those over 42psi....
Epsilon Renntech
2003 Astra SRi-T - The Phantom
EMTRON ECU
Borg Warner EFR7163 & EFR9180
Tuned by Scott @ Insight Motorsports
There are currently 1896 users browsing this thread. (0 members and 1896 guests)