Should be a good reliable package with about 180fwkw soon enough
Are you gonna do any track days with it?
Fronts is just 2 bolts holding strut in and a droplink nut. Clip in engine bay. Shocks are out.
Swap springs over.
Rears just need to drop beam then swap springs out
Simples
Arden Blue VXR- EDS 335PS 480NM
Now
VW Golf R MK6 Stage 2+
@mickos that is the plan, hopefully do a few track day in the next couple of months.
Nope its good to go great height for everywhere
I would suggest doing shocks and springs in one go, I took mine out 2 weeks later as it was harsh.
If your gonna do the springs for now I advise taking front shocks once removed to a shop to change springs over unless you have a compressor to compress the decent spring clamps.
There under a lot of tension once compressed.
Arden Blue VXR- EDS 335PS 480NM
Now
VW Golf R MK6 Stage 2+
@mylifeasbenjamin if you do the shocks too make sure they put the nuts from the original shocks back on as most aftermarket suspension comes with a full ssize m12 nut and the top hat wont sit right in the bonnet. this is how mins is atm and i have been having a heap of trouble trying to source a slim m12 nut to replace it as holden have the wrong part number for that nut.
There are currently 1474 users browsing this thread. (0 members and 1474 guests)