I dont trust that as these mafs are as weak as a bogans claim to being normal. I had an idea of running it into the exhaust, pointing in the direction of the flow. Would be too much ****ing around though
Mine too, into the right mudguard through one of the holes but I get some breather smell sometimes when standing and the wind is blowing in the right direction. There is another option, feed it into the airbox before the filter so that any oil steam is soaked into the filter rather than stain the MAF.
I dont trust that as these mafs are as weak as a bogans claim to being normal. I had an idea of running it into the exhaust, pointing in the direction of the flow. Would be too much ****ing around though
2003 Astra SRi Turbo http://www.opelaus.com/forums/showth...33-My-03-SRi-T
Yet another one
I was too thinking about that but the joint should be at the end of the exhaust, the crankcase needs positive ventilation, meaning something has to suck the steam out. The whole idea of feeding crank case gases into the intake to be "burned" by the engine again is just crazy from performance point of view. We put considerable effort in maximising the air volume and lowering the temperature of the intake air and then feed hot oxygen starved gases into it.... makes no sense at all. it s all to do with pollution only, nothing more.
It's sorta similar to EGR in a way. I will keep it like it is for a while. No doubt I'll change it again lol
2003 Astra SRi Turbo http://www.opelaus.com/forums/showth...33-My-03-SRi-T
Finished building engine.
Put linea rossa on hoist.
Spent 2 hours high pressure washing underside of car.
04 Astra Sri - Silver - Full red leather interior - mk4 888 wheels - Star light roof lining - lowered - ice - exhaust - vxr brakes - quite a few other things.
my ride - no longer faster than qlds sri-t's
OEM+
04 Astra Linea Rossa - Build thread
Stripped head off the z18 motor that I got with a destroyed waterpump. Valves bent on intake side, but pistons arent even marked which I didn't expect. Im guessing waterpump was the original as it took me 2.5 hours of grinding and smashing with prybars and hammers to pop it out. Then lightly sanded everything around where the waterpump sits to clean it up and cleaned the heads of the pistons and block.
Attachment 5556
uploadfromtaptalk1417339615267.jpg
uploadfromtaptalk1417339632187.jpg
OPEL ADDICT 1994 CORSA B 1.5D (ENGLAND) 2001 CORSA C 1.2L (ENGLAND) 2004 CORSA C 1.4L (SOLD) 2004 3.2 V6 VECTRA GTS (SOLD)
1994 CORSA B GSI C16 CONVERTED TO Z18XE (SOLD) 2001 ASTRA VAN Z16SE (CURRENT)
There are currently 907 users browsing this thread. (0 members and 907 guests)