what fault codes do you have?
I am looking at fault code readers on EBAY...
any suggestions on which one i should get..
Do the Astra G's support OBD2 - ???
Check out the links.. Link3 and 4 are the cheapest and would probably opt for one of them... anyone got any suggestions on purchasing them...
Also any suggestions the software to use?
link1
link2
link3
link4
Warning: This is an Old Thread
This discussion is older than 120 days. information contained in it may no longer be current . Please think of the children before resurrecting this ancient thread!
what fault codes do you have?
Audi A3 8P 2.0TFSI QUATTRO | SAT NAV | RS6 19'S | PREMIUM TINT| APR CARBONIO STAGE 2 INTAKE | SPM 3" SS DOWNPIPE W/ 200 CELL CAT
TUNED BY APR
APR STAGE II.
well its just for general use.. But the ones that were scanned for oxygen sensor. and i got 1 cylinder that keeps misfiring. due eaither
a- coil pack overheating
b- the oxygen sensor
c- running to rich
my first step is changing the oxygen sensor
second step is putting it on a dyno to see whats going on..
hey marko, ur's is obd2 compliant so will work fine, if you wanted something good try going for the op-com module.
Audi B6 2004 A4 1.8T S-Line Black. Its Bloody well tuned by AuzVectra.
*Understeer is when you hit the wall with the front of your car and oversteer is when you hit the wall with the rear of your car.
*Horsepower is how fast you hit the wall and torque is how far you take the wall with you.
like this one - link
like that 1, but doesnt have to have can bus, the dearer ones like that $50 or $60 is wat matt has.
Audi B6 2004 A4 1.8T S-Line Black. Its Bloody well tuned by AuzVectra.
*Understeer is when you hit the wall with the front of your car and oversteer is when you hit the wall with the rear of your car.
*Horsepower is how fast you hit the wall and torque is how far you take the wall with you.
I have this one:
http://www.obd-ii.de/prodos.html
Works pretty good and can monitor several parameters at once.
This is a screenshot from when I was monitoring my O2 sensors:
Another option is:
http://www.autoxray.com/product_detail.php?pid=94
Best part is you don't need to use a laptop and it can datalog.
the op-com without canbus is only the old shitty tech 3 module, get the canbus 1 if u go for the opcom.
'04 Sri-T Z23LET - latest stages underway - Slowly - Even slower - $5K over budget :-/
**Qld** Astra TS Turbo Tuner.
yeah ended up getting the one with CAN BUS. just waiting for it to arrive. Been quoted $432 for the rear sensor and $170 for the dump pipe sensor. Anyone know if i can just get a generic one and wire it up to the original plug. >???
There are currently 1 users browsing this thread. (0 members and 1 guests)