anyone..BUMP. noone knows where to get those screw caps?
Does anyone know where to get colour coded screws/caps/clips (not sure what they are) for number plates..like the ones you see on BMW`s etc. they match the white or the blue if the screw is on the characters.
ta.
Warning: This is an Old Thread
This discussion is older than 120 days. information contained in it may no longer be current . Please think of the children before resurrecting this ancient thread!
anyone..BUMP. noone knows where to get those screw caps?
captain obvious says "have you tried asking BMW?"
Very good topic USC
This is something I've done to all my cars, whether they have personalised plates or not - ie: colour code the fixing screw heads
What I've always done is buy touch up paint, that matches the plate colour, very easy for white or black plates, bit harder for others, but I've managed to match all my colours up very well and just paint up the screw heads
On my vert on the rear plate, one of the fixing screws ends up half way onto one of the white characters, so I've carefully touched it up half white and half the plate colour, blends in very well
My rides: 2004 Opel/Bertone TS Astra turbo convertible - 2012 Mercedes Benz C204 C Class coupe
Others: 2009 Honda City VTiL sedan - 2015 Fiat 500
nice! i like the idea of paint but Ive seen plastic caps on bmw`s, volvos, audis...etc.
here is an example:
http://cgi.ebay.co.uk/Pair-of-NEW-Bl...05181118a29949
they have them in white and blue also. but not in australia
Those screws and caps are a good idea, but if you can't find them or can't get the right matching colour, then painting them up as I've done is the go
What I've also done is used screws with a smaller/neater head, so you end up with a neater end result, those cap covers are quite big and will stand out too much IMO, you could alternatively colour code those cap covers
My rides: 2004 Opel/Bertone TS Astra turbo convertible - 2012 Mercedes Benz C204 C Class coupe
Others: 2009 Honda City VTiL sedan - 2015 Fiat 500
hmm..where can I get nice looking security screws? in stainless steel finish..hmmmmm
Astra AH 2.2 SRI coupe, Opelised, Tints, ICE, de-restrict airbox, veccy-c pipe, K&N filter, 2.25 inch sports CAT & 2.25/2.00 inch straight through exhaust system, lowered Pedders springs, Koni shocks, Whiteline: rear sway bar; caster bushes; front camber bolts; and rear camber/toe shims, RDA slotted rotors.
doesnt paint peel off with time? specially on galvanised screws?
Astra AH 2.2 SRI coupe, Opelised, Tints, ICE, de-restrict airbox, veccy-c pipe, K&N filter, 2.25 inch sports CAT & 2.25/2.00 inch straight through exhaust system, lowered Pedders springs, Koni shocks, Whiteline: rear sway bar; caster bushes; front camber bolts; and rear camber/toe shims, RDA slotted rotors.
There are currently 1 users browsing this thread. (0 members and 1 guests)