Dyno day Confirmed for 24th May, Hosted by Ozmazda

[CORZZA]

OZMAZDA Dyno Day will be held at Silverwater Automotive Services (SAS) in Silverwater. Dyno runs will be conducted in "Shootout" mode on a 4WD Dyno Dynamics Chassis Dyno.
The day is open to everyone, all vehicles are more than welcome. Remember - ANY vehicle can compete but to be eligible for the Trophies the car MUST be MAZDA powered.
Each vehicle will receive ONE run on the 4WD Dyno. ONE run consists of two attempts with the best one being recorded and a print out provided


When: Saturday 24th May
Dyno Venue:
Silverwater Automotive Services
Unit 1 / 141 Silverwater Rd,
Silverwater, NSW. 2128
Phone: (02) 9748 1300

WE ARE STILL LOOKING FOR A SPONSOR FOR THIS EVENT! Please contact Michael Giles (0413 329 550) if you are interested in being the trophy Sponsor for Dyno Day!

Costs
Financial Contributors
$45 - 2WD
$65 - 4WD
Non Financial Contributors
$50 - 2WD
$70 - 4WD
Please Note: 4WD cars cost extra due to the extra time on the Dyno that is required to strap the cars down properly.

We will require payment in full for the day before the event in order to confirm your spot. Refunds will be available up to a week before the event if you need to pull out for some reason. The day will be limited to 50 cars, but a minimum of 20 cars is required for the day to proceed.

Commonwealth Bank
Account Name: ozmazda
BSB: 063 464
Account No: 1031 3809

Please enter your user name + the words DynoDay as the transaction reference.
Please PM me once you have paid the deposit.


DETAILS FOR THE DAY

FOOD
The Day will start with a Bacon and Egg Sandwich for Breakfast at $2.50 for Contributors and $3.50 for Non contributors
For Lunch Contributors will be able to buy a Sausage Sandwich for $2 and a cold can of drink for $1. Non contributors will be able to buy a Sausage Sandwich for $3 and a cold can of drink for $1. Rissole sandwiches will also be available at $3 for Contributors and $4 for Non contributors.

TROPHIES
There will be 6 primary categories with the overall Killerwatt King perpetual trophy going to the highest overall score of the day.
Vehicles will be eligible to compete in only one PRIMARY class. The vehicle owner may choose to compete in a higher class but must do so before their Dyno Run.

The 6 Primary classes are:
Under 1800cc N/A Class
1800cc - 2800cc N/A Class
Over 2800cc N/A Class
Under 1800cc Forced Induction Class
1800cc - 2400cc Forced Induction Class
Over 2400cc Forced Induction Class.
The 2 Secondary Class Trophies are:
Top 4WD
Most improved.*
*The Most improved Trophy is for the member with the Highest percentage kw increase on his/her car from the previous Dyno Day. It must be the same Vehicle and must be back to back Dyno days. This trophy will be available on the next Dyno Day.


TROPHY ELIGIBILITY
Only MAZDA powered vehicles are eligible for trophies.
Only your FIRST Dyno Run counts towards the trophies. Should you wish to have a second run on the dyno you are more than welcome to do so. All are welcome to pay for a second run if time allows
However Only the first run will be elegible for consideration. Time permitting Second Runs will be available at the end of the day.
The Offical Judging team on the day will accept comment from each vehicle owner BEFORE the car is unstrapped from the Dyno. The Judges Decision regarding any possible re-run is Final.
The judges decision is final and no correspondence will be entered into. No arguments will be tolerated with the Dyno Operators and any inappropriate behaviour will result in the offending competitor being asked to leave.

CLASS SELECTION
The class eligibility for your vehicle is based on the presence of forced induction be it Turbo or Supercharger and the capacity of your engine. Since there is no way to determine an engine's internal modification, capacity is based on the Original Factory capacity of the block used.
There are no boost limits for the forced induction classes, we do not handicap those people who have constructed an engine capable of supporting higher boost levels.
There are also no restrictions on the type of fuel used on the day. Should you be running anything other than PUMP gas please advise the Dyno opperator PRIOR to your run.

OZMAZDA and SAS will not be responsible for any damage, no matter how arising during testing/moving of the vehicles.

Warning: This is an Old Thread This discussion is older than 120 days. information contained in it may no longer be current . Please think of the children before resurrecting this ancient thread!

[Wraith]

Should be a great/fun day out

Look forward to seeing the power outputs of any (if any) modded MPS3's or 6's...

So what happens if a non Mazda is the most powerful - no trophy

[poita]

all the mazda boys cry and go home lol

as said ang, be intertesting to see wat power some of these cars are putitng out.
especially if there is any modded MPS6's

[CORZZA]

i asked why that was the case and they said it was because they hosting it. but i suppose you dont need a trophy when you have a dyno print out saying you da man!!

[CORZZA]

all the mazda boys cry and go home lol

as said ang, be intertesting to see wat power some of these cars are putitng out.
especially if there is any modded MPS6's

there will be more modded SP23's & 20's. Many a rotary and a hand full from the prelude club have confirmed so far

[CORZZA]

come on fellas bring the good ol C20LET's out and show how its done!

[mr corsa]

ozmazda must have some rich members for them dyno runs

[OPC]

ozmazda must have some rich members for them dyno runs

haha tell me about it

autotech at granville **just around the corner** runs them at $50 for any brand of car and AWD or FWD or RWD

was speaking with a guy 3 weeks ago as of tomorrow at WSID who owned a MPS 3 with full zorst, chipped, CAI, show off valve aswell

got some good footage of his car running down the 1/4 best he could do was 13.9

sadly he said he was gunna sell it due to the car was too powerfull for a FWD

and then i introduced him to tony and his barina...

[SSS_Hoon]

MMM sounds interesting..

Although i think its a tad rich as the one i was at last month was only 50 and it was for 3 runs with a print out of the best run or all 3 if you wanted and that included drinks also.


And was a pay on the day no need for pre entry as that turns alot of ppl off as work commitments changes and what not, cars break and so on.

Would be interested to go but pre entry and only 1 run aint worth $50.


SSS_Hoon

[Wraith]

there will be more modded SP23's & 20's. Many a rotary and a hand full from the prelude club have confirmed so far

So no modded MPS's ??

What's happened with the Xede update that was being discussed on the Ozmazda club months ago ??

Be interesting to see the output numbers of any seriously modded rotaries though, an RX8 with RWD 50/50 weight split and only 1200+kg with a serious rotary would be a blast