Go 80mm and use a piece of 70mm pipe as a spacer. That way if you decide to upgrade to vxr stuff (injectors, maf, turbo etc) then you already have the 80mm pipework
Printable View
Go 80mm and use a piece of 70mm pipe as a spacer. That way if you decide to upgrade to vxr stuff (injectors, maf, turbo etc) then you already have the 80mm pipework
It is basically 70mm silicone straight hose, only need about 1 -2 inches of it.
^ yeah
Autobarn, sprints, supercheap etc sell it per inch. 70mm silicon hose
The airbox I got secondhandand the pipe is an off the shelf Roose Motorsports. This will fit the standard maf. Can easily be upgraded though if you want a vxr maf later down the track (with an appropriate remap of course)
That, not fake, boost gauge, I got from the USA, well under hundred dollars delivered. But it is a bit hard to find an american company that doesnt want to use expensive couriers. But they are out there. Search Ebay. Also this is a mechanical one , always works, quite accurate and much cheaper.
Sadly, I think I still have a boost gremlin somewhere.
She doesn't have the dip in boost that she used to, but it's still not what I think it should be.
Going to get a boost gauge and get her running right before I do any more mods. Stay tuned...
Attachment 5808Attachment 5809
Couple photos of the beast. Taken off my crappy phone, but gives you some idea.
Yep, definitely the one I spotted the other day. Looks good mate.