Painted bonnet Sunday, wet sanded half my bonnet today and gave it its first taste of rubbing compound. Next is a fine polish and then start on the other half
Sent from my Boost View 5.0 using Tapatalk
Printable View
Painted bonnet Sunday, wet sanded half my bonnet today and gave it its first taste of rubbing compound. Next is a fine polish and then start on the other half
Sent from my Boost View 5.0 using Tapatalk
First spot i used rubbing compound on. Cant wait to finish and hit it with the fine polish. Im happy with result so far.
Sent from my Boost View 5.0 using Tapatalk
Fitted a tech edge wideband afr guage, and reflashed the car to eds map 335ps 480nm, boost is now around 21psi and is nice and smooth http://images.tapatalk-cdn.com/15/07...51be2ebd5e.jpg
Turbo Smart recirculating valve came today Friday off this week so will fit then [emoji106]🏼
Guards got rolled today.
No turning back now.
Up and ready to be drained. Will work on the dash and key while still trying to source other parts (damn rebuild kit is giving me grief finding)
Im thinking of getting the parts seperately. Just need to find a supplyer for bearings and gaskets, rods i can order as well as piston rings. Hoping the pistons are still in working order otherwise ill need to source them too. Theres also a VRS kit readily available which will take care of the top end.
Exhaust is 90% planned out and ill start picking up the pieces for that soon.
So it begins...
http://images.tapatalk-cdn.com/15/07...a813e59c85.jpg
Sent from my SM-N910G using Tapatalk
Actually i was going for the x16xe rods ( i think its those ones that bolt in but are much thicker) just forged ones are easily available so might go them. Forged pistons on the other hand... still trying to find some. People on the ccuk forums keep mentioning "cp" pistons or something. But cant find a brand.
Sent from my SM-N910G using Tapatalk
Well the plot thickens with the Astra. After the car had hiccup on the track and threw an engine light it looked as though the MAF was dead. I hooked up my OPCOM on the weekend and confirmed that the car was not getting any reading from the MAF sensor. It was also throwing a P0100 error code.
I ordered a new MAF sensor which arrived yesterday. I put it in the car when I got home and the car is running worse than it did with the dead MAF. It isn't able to idle by itself and the car sputters and struggles with varying throttle input. It also just wants to stall if you try move the car. And now it throws a P1106 error code as soon as you try move it, but not when the car is just sitting there, even if you rev it.
I have taken a video to illustrate.
https://www.youtube.com/watch?v=tOcw...ature=youtu.be
@Raisin. look into the earth mod for the maf.