wheels and lowering chop please

hey guys. the next mods on my to do list for the vectra are lowering and some new wheels. so... could someone please chop these wheels onto the vectra so i can see which i like better... all 19'' and lowering approx 30mm. thanks in advance

vectra base image.
http://i1013.photobucket.com/albums/..._dobson/zc.jpg

gloss black vxr's
http://i1013.photobucket.com/albums/...ravxrgreen.jpg

h3kt1c chromies
http://i1013.photobucket.com/albums/...n/chromies.jpg

and also some zenetti rogues. the same as what bek46 is selling but i didnt think any of those pictures would work

i refuse to photochop either of those wheels in pure disgust... terrible


p.s. aint you sold this car yet? its been like 3months :P

You saw my jizz worthy Green VXR post :p

19" VXR rims in silver would look better than black IMO. But thats my taste. Although maybe an athracite rim may look good?

Just buy some Eibachs already and be done with it. Turn the cruise ship of a car into a small liner.

Or buy some cheap 19" snowies that every man and his dog are selling on Vectra-c.com Some excellent condition rims for a real good price at the moment.

nah i havnt brent haha. forget the chromies. my brother had them on his hilux and hes selling them haha.

yeah i saw the green vxr and jizzed.... i meen i saw your ''jizz worthy vxr'' haha

i couldnt find any full side pics of anthracite vxr's and i would love snowies in anthracite but iv heard a lot of horror stories about them being very poor quality and aparantly they always crack and buckle very easily

Could anyone please chop some zenetti rogues onto the vectta image that I posted.

oh and lower it 30mm

http://184.72.239.143/mu/ca7c5907-377b-ee13.jpg

Sent from my Desire HD using Tapatalk

If you can get me a better picture of the vectra on a slight angle (like most shots you see of cars) at least 1024pixels wide, then i'll probably have a crack.

Quote:

---

Originally Posted by adam_92

Could anyone please chop some zenetti rogues onto the vectta image that I posted.

oh and lower it 30mm

http://184.72.239.143/mu/ca7c5907-377b-ee13.jpg

Sent from my Desire HD using Tapatalk

---

where these pete's wheels?? or were these the ones that someone was selling?

Quote:

---

Originally Posted by gmonkey

where these pete's wheels?? or were these the ones that someone was selling?

---

BEK46P's wheels

Yeah bek's wheels Haha
how's these pics

http://184.72.239.143/mu/ca7c5907-4335-488a.jpg
http://184.72.239.143/mu/ca7c5907-43b0-fd39.jpg

Sent from my Desire HD using Tapatalk

Quote:

---

Originally Posted by adam_92

Yeah bek's wheels Haha
how's these pics



Sent from my Desire HD using Tapatalk

---

Not visible? :lol:

Yeah I kinda forgot to upload them haha

Sent from my Desire HD using Tapatalk

http://i53.tinypic.com/2hppyjb.jpg

not lowered...i'll add lowered pics in in two tics

Adz

DO IT!!

Lowered somewhere around 30mm, maybe a little more
http://i55.tinypic.com/2d9cvfn.jpg

sorry for the front wheel being fk'd, just ignore it, back wheel looks alright lol. is what i get for a 3 min job

fap fap fap

on a scale between Meh and shit... i dont like your chances of scoring high on the scale with those wheels :p

I think it looks the goods... now to wait on the reply from bek. How much do you recon they would weigh per wheel?

Sent from my Desire HD using Tapatalk

20-25kg with tyres, theyre 19"s yeh?

Once again...no worries...any time...:prrr:

There's no tyres. Rims only... your skills still amaze me ain thanks heaps

Sent from my Desire HD using Tapatalk

Not my cuppa, but if you like them go for it!

Also with the lowering, will you go for coilovers? Or just springs? I'd recommend coilovers as you get a much better all round drop on the C's.

after driving with coilovers id recommend going with springs :P ahahha soooo uncomfy!!!!

Probably start with springs then get some decent shocks when money allows. Probably b8s or similar

Sent from my Desire HD using Tapatalk

Quote:

---

Originally Posted by gmonkey

after driving with coilovers id recommend going with springs :P ahahha soooo uncomfy!!!!

---

yeah but the front of the C's never sits low enough with springs. :(

nah it doesnt. the back of mine sits nicely on stock springs i think but lower is always better but the front always looks too high. would shocks and springs on the rear and coilovers on the front work or would it make it unsable with the front and rear not being matched?

Just get the front sprins compressed to sit where u like, those whhels look hot on the veccy!

yeah i think it sets it off really nice. what would the rims weigh by themself without tyres ???? 15kg each??

no more than 15 kegs mate

yeah 15kgs to cover it. whats a cheap courier. worked out with dhl it would be $650ish from sydney to adelaide... almost as much as the wheels... farkkkkkkkk

Quote:

---

Originally Posted by adam_92

yeah 15kgs to cover it. whats a cheap courier. worked out with dhl it would be $650ish from sydney to adelaide... almost as much as the wheels... farkkkkkkkk

---

tnt, pack n send, mcafferties (shit you not)

smart send couriers... 2-3 business days is only $65 or 2 business days is $400... wtf??? why is there such a diference and how come dhl are soooo expensive and also has anyone ever used smartsend couriers

ok so smart send couriers are the cheapest by a mile. redone the quote with insurance for $850 and it was $70 for 2-3 business days. unreal how they are soooo cheap compared to the rest. the next cheapest was mcafferties or whatever they are called which was $230

Quote:

---

Originally Posted by adam_92

ok so smart send couriers are the cheapest by a mile. redone the quote with insurance for $850 and it was $70 for 2-3 business days. unreal how they are soooo cheap compared to the rest. the next cheapest was mcafferties or whatever they are called which was $230

---

Good find mate! Pics or ban when they're fitted :D

very nice mate, shall be awesome!

what tyres have you got lined up for them?

dont worry chris... there wont be any bans... well maybe bans for uploading too many pics haha

pete i havnt got a clue yet. iv got toyo teos on at the minute and they are pretty good tyres but they havnt lasted 2 minutes. iv got about 8 months and around 15000kms out of them so far with about 1.5-2mm left. i think i might try some kumho ku31's they always seem to get good reviews so who knows haha

not long put toyo teos on the mazda, hope they last longer than that for 200 a corner

yeah i paid 205 a corner. i dont know if its me but they havnt lasted long at all. i originally thought it may have been my driving but even the rears have worn really quickly and they dont do jack shit in regards to driving and steering

KU31's. Best tyres I've ever had. Still got them on the 17's with plenty of rubber left after 25,000km

could someone also chop some gloss black sri turbo 18's onto the veccy?? im undecided between the zenettis or the turbo wheels