Printable View
Hi guys,
Yes I'm looking at the wheel scene again...
Took a quick pick of my car today:
http://i837.photobucket.com/albums/z...q/IMG_0084.jpg
Could someone please chop these 2:
http://www.ozracing.com/car_wheels_v...VID/25520.aspx
http://www.new-pheng.com/products_de...?productID=395
Cheers
Todd
EDIT: Forget the samurai's.. The OZ David's and the Enkei RAZRs below is the go I think please :)
neither of them come in 5x110 and also the oz racing ones are $600 each
Reference to information showing the available offsets please? :)Quote:
Originally Posted by gmonkey
alloywheels.com sell Samurai wheels in 5x110 so I believed they would be available over here also.
As for the OZ Racing, I find it hard to believe at $600 per wheel that they wouldn't drill them to the PCD I want. No more expensive than the standard wheels from Holden also.
http://www.lensowheel.com/Raiden-Sub...SubCatID=20002
theyre a 4stud wheel
oops i meant to say lensos arent 5x110 and oz are but $600+ each
theres replica of those davids on ebay .. i was looking at getting them a while back
Seems to be some inconsitencies on Lenso's site then.
http://www.bansuanchonburi.com/max2.php#samurai
SC08's pictured with a 5 stud PCD drilled in them
sc-08
will need to get them redrilled if you are dead set on them.Quote:
7.00 x 17 5x114.3 73 ET40 Samurai SC-08 BKF
also cant find listings for 18" you dont really want 17"s do u?
You're right, they don't come in 18's, so that's the Samurai out. (There's others that come in 18s and 19s I'm sure coz I looked at sizes, but I can find any evidence of an 18 for the SC08)
So that leaves the Davids, althought I am liking these now thanks Brent!!
http://www.enkei.com/razr.html#
Why dont you get something like (16x8.5 Front/16x9.5 Back)and drop it.
Just something different from ordinary 18s/19s.
because 16" looks like shit with mass sidewall :P
What Brent said, besides, it's already dropped and I scrape on haeaps of things as it stands. Any more and I'll be dragging the front lip along the ground. Don't forget I have the SRi-T/VXR kit, not the base model front bar that's good for 28 feet of lowering.Quote:
Originally Posted by PS88
I guess peoples have different tastes lol. XD
Have a look at this thread. I find it sxcy.
http://r32taka.com/2010/07/26/vauxha...gtc-on-bbs-rs/
http://www.astraownersnetwork.co.uk/...t=76677&page=8
wheels are 5x112 and used springbolts to fit them.
8.5 x 18 ET 35
nangkang 215/35/18
Those wheels are porn. Can't wait for the new colour he's doing on it. But they are 18" rims.Quote:
Originally Posted by PS88
Cleaning them would be a nightmare. Can't see it working with the black though.
I have to wonder how much better the roads and driveways are there. Unless I want to spend another $500-600 redoing my new driveway I won't get my car up it if I lower the suspension any more, and I scrape very mildly coming out of my woprk car park on an angle, so definately no go on lowering further. (I can't see Wilson Parking adjusting their car park ramp to suit me, and having wooden planks in the boot to get out of the park every day isn't practical!)
This is all beside the point though, my purpose here is to see the wheels that I have found and like thus far on my car and determine if I wish to proceed further with the concept :)
just get the ****ing samurai rims already. FFS TODD. DO IT
Thanks Shay. I think they actually suit quite well.
Just want to see the RAZRs now in case the bank (wife) doesn't approve of costs... Keep in mind the RAZRs are either 18 or 20. there is no 19 version
I would if they were larger than 17sQuote:
Originally Posted by ChrisMaz
these arent exactly the RAZR's but theyre fking close, and wer already on an astra (J) so it was heaps easier to chop.
only did 18's
http://i381.photobucket.com/albums/o...copyrazr18.jpg
Stock rims look much better, IMO.
Oz Racing Superturismo`s & Ultraleggera`s look good on the Astra as do the BBS CH.
+1Quote:
Originally Posted by BEK-46P
his stock rims are rooted, and cost too much to replace.
Thanks again Shay, they look the same as the RAZRs, both look pretty decent. I'm still thinking, but the David's are probably going to be the better choice since they are graphite, not black. Plus they have that extra level of class.
BBS ch look tough. Was going to get them but changed my mind last minute!Quote:
Originally Posted by kabel
Still thinking about it for mine :-)Quote:
Originally Posted by CNBLU
yeh go on, BBS ! they look the business.
the davids are a similar wheel to what i have, my dad sells those. only thing is they only come in 19x8s but they should fit fine under an ah. mine scrub a little in the rear but im getting stiffer shocks for that. but hell be able to do them for alot less than 600 a wheel and the odds of my car being next to yours would be very slim so i wouldnt mind if you had the same wheels as me
heres a pic of my car with the rims
http://i51.tinypic.com/1zq5938.jpg
Still procrastinating about this. Insurer does wheel repairs, so I'd be forking out all the money for the wheels and repair quote isn't really worth the $350 excess plus losing my NCB Protection.(comes to about $400 all up)
Gonna go for refurbishing first, I'll go from there :)
You can buy my 19's off me if you want lols. No tyre on them XD
Where are you getting the refurb done?Quote:
Originally Posted by UNEEQ