Just had my J serviced, the only issues I had were the heated seats would turn off after 10min and also the rear window regulator needed replacing...but luckily all covered under warranty.
Sent from my D6653 using Tapatalk
Printable View
Started working today on a custom Offset number plate mounting bracket utilising the factory tow hook position. it uses a 30x15x3mm rectangular aluminum bar. holes for the plate are tapped at M5 and the hole at the back is tapped to M10. The idea is to cut the factory tow hook and tap that to M10 and bolt the plate bracket into it. it is currently a work in progress and will be spray painted black when it is completed.
Attachment 6203
Attachment 6204
Attachment 6205
Attachment 6206
Attachment 6207
So update on mine, head has been getting a port and polish treatment, arp studs have arrived for head and for the crank case as well. They are hoping for a new clutch to be made up and arriving by Wednesday to have it all in the car Wednesday afternoon. While waiting for said clutch and after engine is assembled, they will be able to get their measurements for the tubular manifold and should be ready for fitting probably a week later but knowing how long everything has taken another month lol end is insight
Sent from my HTC_PN071 using Tapatalk
Yeah but then I'd be just like everyone else in Adelaide, not to mention I'd be pulled over on the same street as the workshop lol
Sent from my HTC_PN071 using Tapatalk
So they got the aircon working and your able to use it through your controls on the centre console and all the functions work? The guy that did mine had to bypass the factory controls and create an alternative on/off switch and the thermostat does not work very well and have no auto function.