screw lock valve caps?

[SSS_Hoon]

was at a dyno day awhile ago and a guy with a holden calibra had these valve cover caps that locked in with a tiny screw so they made it harder for ppl to knock off, was wondering does anyone know where to get them from and for how much they are?


SSS_Hoon

[imay]

Try Steve: http://www.lmfvauxhall.com/prodCatalog/default.aspx?prodId=815 and don't forget to let him know where you are from.

[EL BURITO]

u could probly ask for them to be sent over or added to the current group buy on badges off LMF maby

[imay]

. . . or here http://search.ebay.com.au/valve-caps-locking_W0QQcatrefZC6QQcoactionZcompareQQcoentrypa geZsearchQQcopagenumZ1QQflocZ1QQfromZR10QQfsooZ1QQ fsopZ1QQftrtZ1QQftrvZ1QQga10244Z10425QQsacatZQ2d1Q QsaprchiZQQsaprcloZQQsaslcZ2QQsbrexpZWD2SQQssPageN ameZWD2S or here http://www.redgriffin.co.uk/search.asp?nobox=&scat=&stext=caps&stype=&sprice=&pg=2

[Clint]

do you have metal valve caps already? if so you could easily make then into 'lock valve caps' just drill andc tap a small hole, maybe M2 and put a grub screw in. to be honest i dont know what a tap costs, i dont buy them i just use them! if u go to any machine shop they should be able to do it for free or a few $$, it will take no more than 1 min for each cap to do it!

at a rough guess a tap costs maybe $10? someone help me out here! grub screws dont cost anything, and a drill bit will be cheap. i might do that one day to mine, ive had one of my chrome valve caps go missing