PDA

View Full Version : Engine mount


sskustomz
16th March 2019, 05:52 PM
Long shot I know but does someone have one of these engine mounts or can give me the part no.? Save me making my own
Steffi
https://uploads.tapatalk-cdn.com/20190316/edd7dc189f21fca0fdd08fd9c36d17fb.jpg



Sent from my iPhone using Tapatalk
chris_r
18th March 2019, 09:36 PM
Part number is 90445285. So, that mount is used to delete AC off a Corsa B that doesn't have the factory power steering, yet has the damper block usually fitted in power steer models. The damper block is part number 90445300, which was later revised to 93305641.
dutchy
18th March 2019, 10:11 PM
Chris, you're a walking encyclopedia :thumbs:
chris_r
18th March 2019, 10:42 PM
Chris, you're a walking encyclopedia :thumbs:

Not quite, but having the Opel EPC installed on my desktop PC helps. Turns out to be one of the best downloads I've ever made, haha.
sskustomz
18th March 2019, 10:43 PM
Holy crap Chris! You are the freaking man!
You married yet?


Sent from my iPhone using Tapatalk
dutchy
19th March 2019, 12:05 PM
Not quite, but having the Opel EPC installed on my desktop PC helps. Turns out to be one of the best downloads I've ever made, haha.

ssssssst :rofl1:
n3ro
25th March 2019, 02:19 PM
I think there is also another one for phase 1 corsa B, I use one of those. In the 1st version the engine mount is not in the frame but welder on its inside side
sskustomz
25th March 2019, 05:10 PM
I think there is also another one for phase 1 corsa B, I use one of those. In the 1st version the engine mount is not in the frame but welder on its inside side



I’ve read about those, i think they were the early 1.2 and 1.4 8valve motors and the gsi had the later mount.


Sent from my iPhone using Tapatalk
dutchy
25th March 2019, 10:15 PM
Give Maroochy wreckers a call. They seem to have a few Corsa barina's in stock. 5445 2888 If they have, I could pick up if need be.
chris_r
27th March 2019, 09:02 PM
Holy crap Chris! You are the freaking man!
You married yet?


Sent from my iPhone using Tapatalk

As of Saturday just been, the answer is yes.


I think there is also another one for phase 1 corsa B, I use one of those. In the 1st version the engine mount is not in the frame but welder on its inside side

The difference generally comes down to whether or not the Corsa in question came factory fitted with power steering. Those fitted with the C12NZ and C14NZ engines typically didn't have power steering, probably because they couldn't pull the skin off a rice pudding, let alone drive AC and power steering units. But yes, typically those engines were only fitted in pre-'97/'98 Corsa Bs (and Combo vans).