My Vectra

[That-Vectra-Guy]

Hi, I just thought I would post up my ride info;
AUS built 1999 JS Vectra CD Cinnabar Pearl
Black leather/dash conversion
factory tint & sunroof
imported Vauxhall "V" grill

engine specs;
3.2 z32se conversion
2.5 intake
3L lower divider
4x "G" cams
3.8bar fpr
intake ports cleaned up
ex ports opened up with the "lump" removed
courtenay lightened flywheel
LMF Vauxhall 2.6L black diamond HD clutch
low K F23 from a 2.6
2.5" exhaust from the engine Y pipe
308mm front brakes using NEO Brothers caliper carriers
crappy RDA pads :RollingEyes:
17x7 Team Dynamics IMOLA wheels
Khumo KU31 215/45

soon to have;
68mm throttle body
tubular headers (front is done, 1/2 thru doing the rear)
wide mouth JS2 v6 front bar (if I ever find one) :cryin:
black base headlights with HID's

honestly it has the typical trolley/door dings & chips but it cleans up nice after a wash & wax

[guy 27]

Welcome to OA

[dutchy]

Hi, I just thought I would post up my ride info;
AUS built 1999 JS Vectra CD Cinnabar Pearl
Black leather/dash conversion
factory tint & sunroof
imported Vauxhall "V" grill

engine specs;
3.2 z32se conversion
2.5 intake
3L lower divider
4x "G" cams
3.8bar fpr
intake ports cleaned up
ex ports opened up with the "lump" removed
courtenay lightened flywheel
LMF Vauxhall 2.6L black diamond HD clutch
low K F23 from a 2.6
2.5" exhaust from the engine Y pipe
308mm front brakes using NEO Brothers caliper carriers
crappy RDA pads :RollingEyes:
17x7 Team Dynamics IMOLA wheels
Khumo KU31 215/45

soon to have;
68mm throttle body
tubular headers (front is done, 1/2 thru doing the rear)
wide mouth JS2 v6 front bar (if I ever find one) :cryin:
black base headlights with HID's

honestly it has the typical trolley/door dings & chips but it cleans up nice after a wash & wax

post up some pics if you can :)

[faneca]

Nice sounding build man! Sounds like a bit of work has been done!


Sent from my iPhone using Tapatalk

[That-Vectra-Guy]

forgot to add..whiteline sway bars, lowered on kings & walbro gs342 pump.
I will post up some pics soon, its due for a detail in the next week or so.

[sskustomz]

Sounds tasty, any dyno figures?


Sent from my iPhone using Tapatalk

[That-Vectra-Guy]

no dyno figures but the stock z32 puts out 155kw so with the add ons probably at a guess around the 160-170kw, probably more once I do the tubular headers
all I know is it was a massive+ improvement from the x25 with the same mods in regards to kw, tq & higher rpm capability