PDA

View Full Version : Transporting motors



ant0ny
29th August 2016, 04:37 PM
Transporting motors from Brisbane to Melbourne? Has anyone got an idea who would be good.

I contacted TNT and they where $320 but then they said I needed a ABN and said ring Pack and Send. Well P&S want $520 and if was going to insure it another $400 WTF

Anyone got a contact or used a company recently?

Antony

adam_92
29th August 2016, 04:59 PM
E go. Never sent a motor but sent plenty wheels/tyres/suspension etc

Sent from my SM-N930F using Tapatalk

Bobec
29th August 2016, 05:30 PM
I can second e-go. They may want it drained of oil strapped to a pallet and wrapped

sent from my LG G4

ant0ny
29th August 2016, 05:37 PM
cool I'll give them a try and see how much they want.

guy 27
29th August 2016, 05:52 PM
I've sent a few pallets with e-go.

just make sure everything is secure to pallet very well and protected as much as possible.

ant0ny
29th August 2016, 06:11 PM
Yeah I have a full boxed in crate... did their quick calc and looks like about $380... now we are talking.

poita
29th August 2016, 08:00 PM
As above, E-Go.

Have sent wheels, engine parts, all sorts of bits with them. Always been happy with them

chris_r
29th August 2016, 10:47 PM
My Z20LET and box travelled from Melbourne to Adelaide via TNT and that cost $200. But they only transported it to the Adelaide depot and not to my door. That didn't bother me, as I had the facilities (one Transit van and an engine crane) to make up the rest of the distance.

I should add, the arrangements were made by the sender, which is a wrecking yard, who probably have a contract with TNT.

Sent from my E6853 using Tapatalk

ant0ny
14th September 2016, 10:35 PM
Verry happy with E-Go

I did depot to door (brisi to melb), the box was 280kgs and cost $250ish and took a week.