20% off in stock DBA rotors, and half price pads to match!!!

[gslrallysport]

http://www.gslrallysport.com/DBA/logo%20design%20smaller.jpg

This week only, and only whilst stocks last, all DBA rotors currently in stock at GSL RallySport are 20% off, plus we'll throw in matching pads in ANY brand we stock half price! Whether it's a basic trade servicing pad like Horsepower, a performance street pad like QFM, a prestige European made pad like Remsa, or even competition pads like Project Mu, as used by the V8 Supercars, we'll do them HALF price!! Or any of the other 8 brands of pads we stock.

http://www.gslrallysport.com/DBA/Logo.jpg

The widest range of DBA rotors on sale ever:
- Capri - Laser - 30X - HiLux - Astra VXR - H3 Hummer - Focus - C30 - C70 - S40 - V50 - Lancer - Clio - Kangoo - Megane - Scenic - iLoad - Civic - Integra - RX8 - Liberty - Forester - A4 - S4 - Golf - Passat - Octavia - Rodeo - Mazda 6 - Familia - 929 - Premacy - Mazda 3 - MX5 - MPS 3/6 - Commodore - Mustang - Prelude - 3000GT - Amarok - Q7 - Cayenne - Touareg - Caravelle - 911 - Boxster - Cayman - A6 - S6 - A8 - S8 - Evo - Cordoba - Ibiza - NSX - MR2 - SVX - GS300 - LS400 - SC400 - Aristo - S2000 - Skyline - Falcon - Outback - HSV - Elise - Transporter - Patrol - Navara - Impreza - STi - Barina - 200SX - Plus much more! -

For the full list of what's available, checkout the catalog:
GSL RallySport March DBA Clearance Sale (pdf 142kb) (http://www.gslrallysport.com/DBA/GSL%20RallySport%20and%20Brakes%20Direct%20DBA%20M arch%20Clearance%20List.pdf)

As always, any questions or queries just let us know! Either reply directly to this email, or give us a call, 1300 884 836!

http://www.gslrallysport.com/DBA/Facebook.png (http://www.facebook.com/gslrallysport)

[SSS_Hoon]

do u need to buy the rotors to get pads at half price?

interested in some for Nissan GTR R32 4 spot calipers, the sumimoto (i think) ones.

[gslrallysport]

Yep, you do. In most cases half price is below cost, and only gets covered by the sale of the rotor. What in particular were you after?

[SSS_Hoon]

was after pads only.

unless u have some undrilled GTR R32 rotors aswell?

[JohnBu]

Reply to my email Greg re: Golf GTI god damn it! lol

Kidding, must be a busy day.


Sent from my iPhone 4S using Tapatalk

[gslrallysport]

Why undrilled? Typically they're more expensive than drilled, and extra holes in the mounting face isn't an issue.

[gslrallysport]

Reply to my email Greg re: Golf GTI god damn it! lol

Kidding, must be a busy day.
Like you wouldn't believe... I'll find it now, gimme 5.

Matt's only just left now, and I'll still be here for an hour or two!

[SSS_Hoon]

undrilled as i need to get them re drilled to 4x100 PCD

in that case prices on pads only for R32 GTR 4spot sumimoto calipers. Most likely the QFM A1RM range i think, as they would be suited for daily spirited driving with the occasional track day here n there wouldn't they? how noisy are they when cold.

[xplosv57]

Astra SRi Turbo front and rear DBA Gold rotors and QFM A1RM pads price please =)

[faneca]

astra fronts disk brakes and pads, biggest you can fit under 17" with a 4x100 stud pattern

[guy 27]

astra fronts disk brakes and pads, biggest you can fit under 17" with a 4x100 stud pattern

what calipers are you going to use?

[adam_92]

You can only get one size unless you upgrade calipers Aaron...

[faneca]

bugger how much are calipers too? LOL

[gslrallysport]

undrilled as i need to get them re drilled to 4x100 PCD
May have missed the point... They don't need to be undrilled to put a 4x100 PCD into them. HEAPS of rotors come standard with extra holes that aren't used, most commonly STi (with have both stud patterns), and VR/VS Commdore rears. Both of which have 10 holes in the mounting face, where only 5 are used.


in that case prices on pads only for R32 GTR 4spot sumimoto calipers. Most likely the QFM A1RM range i think, as they would be suited for daily spirited driving with the occasional track day here n there wouldn't they?
Yep, definitely! $119 per set front or rear.


how noisy are they when cold.
Ordinarily, not very, but opposed piston calipers like those Sumitomo's are notorious for noise by design. If noise is an issue then we've both both the Project Mu and EBC shims available that will shut them up.

[SSS_Hoon]

Yeah I know that, I currently have a set on the car drilled at 114.3x4 as that is what the hubs are, but the car is meant to be 4x100 that is what the rear is so was thinking do the front same so I can get some new wheels, as needing multistud wheels limits the choice when it comes to lightweight performance wheels.

Also was told to get it legal/engineered the rotor would need to be blank n drilled. Something about drilling a already drilled rotor or something like that. Too much effort for now though just keep it how it is n put up with my ugly chromies lolz


$119 is that shipped? If not how much posted to west Sydney 2750. Also how much are the shims. And how do I go about paying for them?


Also what do u have in the way of suspension for a N14 SSS

[gslrallysport]

$119 is that shipped? If not how much posted to west Sydney 2750. Also how much are the shims. And how do I go about paying for them?
Shipping on just one set of pads is $12, or else free if you're ordering 2 or more sets of pads together.

Easiest way to order is credit card over the phone, 1300 884 836, or else swing me your details, full name, delivery address (preferably a work or business address!!), contact number and email and I can fire you through an invoice with direct deposit details.


Also what do u have in the way of suspension for a N14 SSS
Heaps, what are you using the car for, and what sort of budget did you wan to work to? Everything from KYB, Koni, Bilstein, DMS etc... heaps to choose from.

[gslrallysport]

Astra SRi Turbo front and rear DBA Gold rotors and QFM A1RM pads price please =)
When you say Gold, you mean the cross drilled ones yeah?

[xplosv57]

When you say Gold, you mean the cross drilled ones yeah?

Yep!

[gslrallysport]

Hi mate,

4 stud Astra front rotors are on the list, $89.76 each. Pad, I'd go QFM HPX, which are a Bendix Ultimate equivalent, but low dust and rotor wear. Normally $79, with the purchase of the clearance rotors, $39.50 for the set.

Easiest way to order is credit card over the phone, 1300 884 836, or else swing me your details, full name, delivery address (preferably a work or business address!!), contact number and email and I can fire you through an invoice with direct deposit details.

Regards,
Greg

[gslrallysport]

Yep!
Cool.

Not on special, but front 4000 series fronts are $215.40 each, and rear street series are $181.50 each. The vice versa (street front and 4000 rears) aren't available.

A1RM to suit $119 per set front or rear.

Regards,
Greg