View Full Version : wheels and lowering chop please
adam_92
18th February 2011, 12:58 AM
hey guys. the next mods on my to do list for the vectra are lowering and some new wheels. so... could someone please chop these wheels onto the vectra so i can see which i like better... all 19'' and lowering approx 30mm. thanks in advance
vectra base image.
http://i1013.photobucket.com/albums/af251/adam_dobson/zc.jpg
gloss black vxr's
http://i1013.photobucket.com/albums/af251/adam_dobson/vectravxrgreen.jpg
h3kt1c chromies
http://i1013.photobucket.com/albums/af251/adam_dobson/chromies.jpg
and also some zenetti rogues. the same as what bek46 is selling but i didnt think any of those pictures would work
gmonkey
18th February 2011, 01:34 AM
i refuse to photochop either of those wheels in pure disgust... terrible
p.s. aint you sold this car yet? its been like 3months :P
ChrisMaz
18th February 2011, 04:48 AM
You saw my jizz worthy Green VXR post :p
19" VXR rims in silver would look better than black IMO. But thats my taste. Although maybe an athracite rim may look good?
Just buy some Eibachs already and be done with it. Turn the cruise ship of a car into a small liner.
Or buy some cheap 19" snowies that every man and his dog are selling on Vectra-c.com Some excellent condition rims for a real good price at the moment.
adam_92
18th February 2011, 06:12 PM
nah i havnt brent haha. forget the chromies. my brother had them on his hilux and hes selling them haha.
yeah i saw the green vxr and jizzed.... i meen i saw your ''jizz worthy vxr'' haha
i couldnt find any full side pics of anthracite vxr's and i would love snowies in anthracite but iv heard a lot of horror stories about them being very poor quality and aparantly they always crack and buckle very easily
adam_92
9th March 2011, 07:17 PM
Could anyone please chop some zenetti rogues onto the vectta image that I posted.
oh and lower it 30mm
http://184.72.239.143/mu/ca7c5907-377b-ee13.jpg
Sent from my Desire HD using Tapatalk
sooty
9th March 2011, 07:28 PM
If you can get me a better picture of the vectra on a slight angle (like most shots you see of cars) at least 1024pixels wide, then i'll probably have a crack.
gmonkey
9th March 2011, 07:39 PM
Could anyone please chop some zenetti rogues onto the vectta image that I posted.
oh and lower it 30mm
http://184.72.239.143/mu/ca7c5907-377b-ee13.jpg
Sent from my Desire HD using Tapatalk
where these pete's wheels?? or were these the ones that someone was selling?
hazrd
9th March 2011, 07:42 PM
where these pete's wheels?? or were these the ones that someone was selling?
BEK46P's wheels
adam_92
9th March 2011, 07:59 PM
Yeah bek's wheels Haha
how's these pics
http://184.72.239.143/mu/ca7c5907-4335-488a.jpg
http://184.72.239.143/mu/ca7c5907-43b0-fd39.jpg
Sent from my Desire HD using Tapatalk
sooty
9th March 2011, 08:04 PM
Yeah bek's wheels Haha
how's these pics
Sent from my Desire HD using Tapatalk
Not visible? :lol:
adam_92
9th March 2011, 08:09 PM
Yeah I kinda forgot to upload them haha
Sent from my Desire HD using Tapatalk
sooty
9th March 2011, 08:34 PM
http://i53.tinypic.com/2hppyjb.jpg
not lowered...i'll add lowered pics in in two tics
hazrd
9th March 2011, 08:35 PM
Adz
DO IT!!
sooty
9th March 2011, 08:38 PM
Lowered somewhere around 30mm, maybe a little more
http://i55.tinypic.com/2d9cvfn.jpg
sorry for the front wheel being fk'd, just ignore it, back wheel looks alright lol. is what i get for a 3 min job
hazrd
9th March 2011, 08:40 PM
fap fap fap
gmonkey
9th March 2011, 08:46 PM
on a scale between Meh and shit... i dont like your chances of scoring high on the scale with those wheels :p
adam_92
9th March 2011, 08:59 PM
I think it looks the goods... now to wait on the reply from bek. How much do you recon they would weigh per wheel?
Sent from my Desire HD using Tapatalk
gmonkey
9th March 2011, 09:00 PM
20-25kg with tyres, theyre 19"s yeh?
sooty
9th March 2011, 09:07 PM
Once again...no worries...any time...:prrr:
adam_92
9th March 2011, 09:46 PM
There's no tyres. Rims only... your skills still amaze me ain thanks heaps
Sent from my Desire HD using Tapatalk
ChrisMaz
9th March 2011, 09:58 PM
Not my cuppa, but if you like them go for it!
Also with the lowering, will you go for coilovers? Or just springs? I'd recommend coilovers as you get a much better all round drop on the C's.
gmonkey
9th March 2011, 10:17 PM
after driving with coilovers id recommend going with springs :P ahahha soooo uncomfy!!!!
adam_92
9th March 2011, 10:27 PM
Probably start with springs then get some decent shocks when money allows. Probably b8s or similar
Sent from my Desire HD using Tapatalk
ChrisMaz
9th March 2011, 10:49 PM
after driving with coilovers id recommend going with springs :P ahahha soooo uncomfy!!!!
yeah but the front of the C's never sits low enough with springs. :(
adam_92
9th March 2011, 10:55 PM
nah it doesnt. the back of mine sits nicely on stock springs i think but lower is always better but the front always looks too high. would shocks and springs on the rear and coilovers on the front work or would it make it unsable with the front and rear not being matched?
CNBLU
9th March 2011, 11:00 PM
Just get the front sprins compressed to sit where u like, those whhels look hot on the veccy!
adam_92
9th March 2011, 11:03 PM
yeah i think it sets it off really nice. what would the rims weigh by themself without tyres ???? 15kg each??
hazrd
9th March 2011, 11:05 PM
no more than 15 kegs mate
adam_92
9th March 2011, 11:17 PM
yeah 15kgs to cover it. whats a cheap courier. worked out with dhl it would be $650ish from sydney to adelaide... almost as much as the wheels... farkkkkkkkk
poita
9th March 2011, 11:26 PM
yeah 15kgs to cover it. whats a cheap courier. worked out with dhl it would be $650ish from sydney to adelaide... almost as much as the wheels... farkkkkkkkk
tnt, pack n send, mcafferties (shit you not)
adam_92
9th March 2011, 11:26 PM
smart send couriers... 2-3 business days is only $65 or 2 business days is $400... wtf??? why is there such a diference and how come dhl are soooo expensive and also has anyone ever used smartsend couriers
adam_92
9th March 2011, 11:44 PM
ok so smart send couriers are the cheapest by a mile. redone the quote with insurance for $850 and it was $70 for 2-3 business days. unreal how they are soooo cheap compared to the rest. the next cheapest was mcafferties or whatever they are called which was $230
ChrisMaz
9th March 2011, 11:49 PM
ok so smart send couriers are the cheapest by a mile. redone the quote with insurance for $850 and it was $70 for 2-3 business days. unreal how they are soooo cheap compared to the rest. the next cheapest was mcafferties or whatever they are called which was $230
Good find mate! Pics or ban when they're fitted :D
poita
9th March 2011, 11:53 PM
very nice mate, shall be awesome!
what tyres have you got lined up for them?
adam_92
10th March 2011, 12:17 AM
dont worry chris... there wont be any bans... well maybe bans for uploading too many pics haha
pete i havnt got a clue yet. iv got toyo teos on at the minute and they are pretty good tyres but they havnt lasted 2 minutes. iv got about 8 months and around 15000kms out of them so far with about 1.5-2mm left. i think i might try some kumho ku31's they always seem to get good reviews so who knows haha
poita
10th March 2011, 12:18 AM
not long put toyo teos on the mazda, hope they last longer than that for 200 a corner
adam_92
10th March 2011, 12:23 AM
yeah i paid 205 a corner. i dont know if its me but they havnt lasted long at all. i originally thought it may have been my driving but even the rears have worn really quickly and they dont do jack shit in regards to driving and steering
ChrisMaz
10th March 2011, 04:23 AM
KU31's. Best tyres I've ever had. Still got them on the 17's with plenty of rubber left after 25,000km
adam_92
11th May 2011, 03:10 PM
could someone also chop some gloss black sri turbo 18's onto the veccy?? im undecided between the zenettis or the turbo wheels
Powered by vBulletin® Version 4.2.4 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.