View Full Version : New Astra VX-R Racer at Racer Industries
Racer Industries
2nd December 2010, 01:05 AM
Hi All
Thought I would post some pics of our new VX-R racecar.
We have built this from a genuine VX-R and have just shipped it to Dubai to race in a 24hr touringcar race in January.
The mods include engine work by Cragsted performance, Forged Pistons, H-Beam Rods, Ballance shaft deletion.
Garret GT28 Turbo upgrade inluding cast manifold. Light weight flywheel and SACHS clutch. CES fitted a stainless 3" system with twin dump pipe.
MCA adjustable dampers and Team Dynamics rims with 235 40 18 Dunlop slicks. We have fitted the whiteline rear adjustable bar also.
Transmission is standard but we have added a Quaife ATB.
Power ended up at 365 BHP , and we have stripped everything out to get the weight down to 1100kg.
We have a custom MOTEC system including Engine management with Drive By Wire, traction control, boost control (driver adjustable) and have retained the factory ABS and Electronic power steering.
The car is great to drive and very fast.
The race is in early January so we are looking forward to see how it goe.
If anyone is intersted I do have all the standard VXR parts that we pulled of (seats trim etc)
Cheers
Ryan
http://lh5.ggpht.com/_MjWHS1_FQxY/TPZUeQfVgvI/AAAAAAAAAe8/sO2BYrydHrI/s720/IMG_8751.JPG
http://lh4.ggpht.com/_MjWHS1_FQxY/TPZUf3AiHYI/AAAAAAAAAfA/YK3ckAJf9bk/s720/IMG_8776.JPG
http://lh6.ggpht.com/_MjWHS1_FQxY/TPZUi-swEbI/AAAAAAAAAfE/3P9z951NVUU/s720/IMG_8818.JPG
http://lh4.ggpht.com/_MjWHS1_FQxY/TPZUrU3kiWI/AAAAAAAAAfU/4MqhU5FVirA/s720/IMG_8895.JPG
http://lh4.ggpht.com/_MjWHS1_FQxY/TPZUts1vwFI/AAAAAAAAAfY/LXE_hl-Kizw/s720/IMG_8926.JPG
glider
2nd December 2010, 01:10 AM
welcome to OA, look forward to seeing some pics of the car!
and expressing interest in seats ;)
-edit-
and now that I can see pics, also interested in steering wheel
sooty
2nd December 2010, 01:11 AM
Welcome to OA mate
kabel
2nd December 2010, 01:19 AM
Welcome !
gmonkey
2nd December 2010, 01:50 AM
SHOW ME PICS!!! please :p ahhaa
ChrisMaz
2nd December 2010, 03:37 AM
OH MY GOD.... Welcome to OA. Can't wait to see this in action. PHWARRR thats a mean VXR....
SHOTGUN the brakes!
What race is it going to be entered in exactly?
mr corsa
2nd December 2010, 09:44 AM
nice work there but personally i would of located the motec inside the cabin alot more safer !
what sought of power is at the wheels?
gman
2nd December 2010, 09:51 AM
Mate very impressive....You've basically gone where I'm heading with mine... :thumbs:
What Garrett are you running at the moment??
Was the 365BHP at the fly or the wheels??
Nurb608
2nd December 2010, 10:29 AM
Welcome to the site!
One question to start with, just out of curiosity, how come you had to delete the balance shaft if it was an original vxr? The Z20LEH doesn't have one to begin with.
Nice choice on the rims though ;) Can't wait to see how it goes.
metry
2nd December 2010, 10:29 AM
that is a very nice vxr you got. welcome to oa
guy 27
2nd December 2010, 11:28 AM
Welcome to OA.
Keep us posted on when and where we can see it racing in Aus. :)
tomtom
2nd December 2010, 11:33 AM
Welcome to OA
Very cool i like :)
Hoss
2nd December 2010, 08:12 PM
Welcome to OA and good luck with the racing. Love those wheels.
xplosv57
3rd December 2010, 09:10 AM
Another Nurb accounted for....
WOW, that is one awesome race car, good luck in Dubai!!
boorny88
3rd December 2010, 11:14 AM
welcome to oa and nice car good luck with your race
XLR87N
3rd December 2010, 04:49 PM
i may need new pants after seeing that machine
Racer Industries
5th December 2010, 10:15 PM
Hi
Thanks for the post.
It has 365 at the flywheel. would be more if I ran the boost up, but for a 24hr race 365 is OK. It has a GT38RS (disco potatoe)
Ryan
Racer Industries
5th December 2010, 10:20 PM
We put it under the bonnet to save weight. The Factory ECU is normally under the bonnet on most cars anyway
Ryan
Nurb608
5th December 2010, 10:26 PM
We put it under the bonnet to save weight. The Factory ECU is normally under the bonnet on most cars anyway
Ryan
Hey Ryan,
What are you running off the ECU? Just the motor or everything including the windows etc?
Racer Industries
5th December 2010, 10:48 PM
Hi Thanks for the post. We run the LER motor, cause they are easy to get. In australia we have been racing as and SRiT for a few years with another car.
We also add the under piston cooling
Cheers
Ryan
http://picasaweb.google.com/lh/photo/vrx0s9SbhxuWYbHiHMT-XzjOi9KxFmGhN56elv0DX0U?feat=directlink
03srit
5th December 2010, 10:48 PM
welcome and wow! nice car!!
Racer Industries
5th December 2010, 10:52 PM
We use the ECU for the Engine only. We have a motec Power Distribution Module and the SDL 3 Dash to control the rest.
In the SRi T, we still run the factory ECU in piggybak so it can work the other modules on the car , but in this car we control the Power steering, alternator and ABS directly from the motec.
The car does not have moveable windows
Ryan
Nurb608
5th December 2010, 10:54 PM
We use the ECU for the Engine only. We have a motec Power Distribution Module and the SDL 3 Dash to control the rest.
In the SRi T, we still run the factory ECU in piggybak so it can work the other modules on the car , but in this car we control the Power steering, alternator and ABS directly from the motec.
The car does not have moveable windows
Ryan
Cheers Ryan ;)
That gives me what i need to progress further with my tuning :D
Racer Industries
5th December 2010, 10:54 PM
We are actually the agent for the wheels (Team Dynamics) We can get them for Astra in 17 x 7.5 and 18x8. I believe 19 is also available, but I have never got any. This car runs the 18x8, but the Sri T we race uses the 17x7.5, we found it a little quicker with the smaller tyres
Ryan
Racer Industries
5th December 2010, 10:56 PM
If you are adding a Motec, we could help you out a little. We used Motec cause the DBW throttle was the best. I interfaced it with the Factory ABS to get wheel speed info so we also have traction and launch control
Ryan
gman
5th December 2010, 10:57 PM
I was going to ask about the rims?? Any prices on the 17's??
Also, what Garrett are you running?? GT2871R or GT2860RS etc??
If you are adding a Motec, we could help you out a little. We used Motec cause the DBW throttle was the best. I interfaced it with the Factory ABS to get wheel speed info so we also have traction and launch control
Ryan
I looked at the Motec but went with a Vipec V88 instead...Same reasons, ran the DBW throttle and picked up the stock wheel speeds too...The Vipec was a personal chice and the engine builder I use loves them... :)
poita
5th December 2010, 10:58 PM
I was going to ask about the rims?? Any prices on the 17's??
Also, what Garrett are you running?? GT2871R or GT2860RS etc??
Hi
Thanks for the post.
It has 365 at the flywheel. would be more if I ran the boost up, but for a 24hr race 365 is OK. It has a GT38RS (disco potatoe)
Ryan
;)
Racer Industries
5th December 2010, 10:58 PM
The steering wheel was cut up to Manufacture the Boss to ad the OMP racing Unit, so it is gone. The seats and rest of the trim are all fine. Car only had 3000 k's on it when I got it.
You can PM me if you are interested
Ryan
Nurb608
5th December 2010, 11:00 PM
We are actually the agent for the wheels (Team Dynamics) We can get them for Astra in 17 x 7.5 and 18x8. I believe 19 is also available, but I have never got any. This car runs the 18x8, but the Sri T we race uses the 17x7.5, we found it a little quicker with the smaller tyres
Ryan
Alot of people would be interested on prices direct in aus for this as most of us get them from the uk such as myself ;)
If you are adding a Motec, we could help you out a little. We used Motec cause the DBW throttle was the best. I interfaced it with the Factory ABS to get wheel speed info so we also have traction and launch control
Ryan
Where abouts are you guys? Interested in interfacing the M84 running in parellel with the factory ecu to keep all functions but able to tune the motor for club events.
Racer Industries
5th December 2010, 11:02 PM
I believe it is the 60rs turbo. Se image attached
17" wheels are around 420 a piece. I think i have some Satin Black ones in stock
Ryanhttp://picasaweb.google.com/lh/photo/Iaqtd-AIGsG0LhwYs976_DjOi9KxFmGhN56elv0DX0U?feat=directl ink
gman
5th December 2010, 11:03 PM
Hi
Thanks for the post.
It has 365 at the flywheel. would be more if I ran the boost up, but for a 24hr race 365 is OK. It has a GT38RS (disco potatoe)
Ryan
Opps, I missed this post... :) OK I'm dumb...Sorry Ryan..My bad...
Mines running a GT2860RS too, but I added a Tial turbine housing (& external watsegate) and billett compressor wheel...I have a GT2871R but to much lag for a circuit car...I'm not doing 24hrs, but thinking about IPRA and the restrictor make anything bigger than a GT2860 useless anyway!! :(
I'll get back to you on the wheels....But very interested...
Racer Industries
5th December 2010, 11:08 PM
We are on the gold coast
Interfacing an M84 is possible. Basically we take all the inputs in tandem so the factory ECU still thinks it is running the engine. We control the DBW, Injectors and Coils. It worked pretty seamlessly in the SRi-T, although that was with the M800, but I am sure M84 would be OK
You can PM me here for contact or www.racerindustries.com
MatsHolden
5th December 2010, 11:09 PM
welcome ryan. glad to see you've preppd another astra race car. I'm guessing you're the mcleod crew who had the sri-t entered in the bathurst 12 hour the past couple of years? Any plans on entering this one inthe 12 hour?
guy 27
5th December 2010, 11:11 PM
welcome ryan. glad to see you've preppd another astra race car. I'm guessing you're the mcleod crew who had the sri-t entered in the bathurst 12 hour the past couple of years? Any plans on entering this one inthe 12 hour?
2010 results
12
http://www.bathurst12hour.com.au/cars/50.jpg
50
G.McLeod/P.McLeod/R.McLeod
Racer Industries
Holden Astra SR-I Tu
Class D
Laps 192
Total 12:02:29.8644
Fastest 2:42.2718
lap 27
Nurb608
5th December 2010, 11:12 PM
We are on the gold coast
Interfacing an M84 is possible. Basically we take all the inputs in tandem so the factory ECU still thinks it is running the engine. We control the DBW, Injectors and Coils. It worked pretty seamlessly in the SRi-T, although that was with the M800, but I am sure M84 would be OK
You can PM me here for contact or www.racerindustries.com
Cheers Ryan.
Yeah, the M84 is pretty much the same with a few less data logging capabilities so should be the same.
Don't suppose you visit Melbourne? lol :D
Good luck with the racing as we all support anyone running our type of cars ;)
And anything you can offer the forum would be greatly appreciated, just have a chat to poita to work out some details if you want as we would be greatfull for any assistance anyone can offer :D
Racer Industries
5th December 2010, 11:14 PM
Cool, would be good to see some shots of yours. I have thought of IPRA, but I think the restrictor is a joke. Specially when some of those cars make 600hp un restricted V8
I think I will keep this one for endurance circuit racing
Ryan
Racer Industries
5th December 2010, 11:14 PM
Another Pic of the front end
http://lh3.ggpht.com/_MjWHS1_FQxY/TPuB2Y8y-QI/AAAAAAAAAgE/n9NFj2zEaLY/s640/14112010191.jpg
Racer Industries
5th December 2010, 11:18 PM
Yeah, no probs Racer Industries would be happy to support the forum. We have some good sources for supply for the AH astras and plenty of bits and pieces. If anyone is considering race prepping a car we could help them out also
If someone wants to call me at Racer Industries, I would be happy to look at some advertising or whatever
Ryan
Nurb608
5th December 2010, 11:18 PM
Another Pic of the front end
http://lh3.ggpht.com/_MjWHS1_FQxY/TPuB2Y8y-QI/AAAAAAAAAgE/n9NFj2zEaLY/s640/14112010191.jpg
Wished mine looked that clean at the front end ;)
poita
5th December 2010, 11:19 PM
Yeah, no probs Racer Industries would be happy to support the forum. We have some good sources for supply for the AH astras and plenty of bits and pieces. If anyone is considering race prepping a car we could help them out also
If someone wants to call me at Racer Industries, I would be happy to look at some advertising or whatever
Ryan
Will be in touch mate
Nurb608
5th December 2010, 11:19 PM
Yeah, no probs Racer Industries would be happy to support the forum. We have some good sources for supply for the AH astras and plenty of bits and pieces. If anyone is considering race prepping a car we could help them out also
If someone wants to call me at Racer Industries, I would be happy to look at some advertising or whatever
Ryan
Glenn/Pete, this is over to you two :D
Racer Industries
5th December 2010, 11:20 PM
We have not decided on the 12hour yet. We have been flat out getting ready for the 24hr in Dubai. But I still have the SRiT here so we may run it.
We will be upgrading the SRI T to VX-R spec because they changed the class rules. So we will be racing here in the Championship next year, but the car will be entered as a VX-R
Ryan
Racer Industries
5th December 2010, 11:23 PM
Thanks V Much. We will have a blog on the webpage www.racerindustries.com from about the 13 Jan 2011. That will keep everyone informed
Cheers
Ryan
gman
6th December 2010, 12:03 PM
Glenn/Pete, this is over to you two :D
Ryan, I'll be on touch shortly.. :)
Nurb608
28th January 2011, 01:42 PM
Love the full wheel mark half way down the side :D
http://www.supercars.net/gallery/119513/2580/978107.jpg
gman
28th January 2011, 02:11 PM
As Harry Hogg said:
"Rubbin' son is racin'!!" :lol:
Car looks good though...
metry
28th January 2011, 07:05 PM
Love the full wheel mark half way down the side :D
howd they manage that
Nurb608
28th January 2011, 08:04 PM
No idea! Looking at how high up it is either they were turning left very hard or the other car had a wheel right up in the air!
Nurb608
28th January 2011, 09:21 PM
And something I wasn't aware of! http://www.courtenaysport.co.uk/index.php?act=latestNews&article=62
kabel
29th January 2011, 02:39 PM
And something I wasn't aware of! http://www.courtenaysport.co.uk/index.php?act=latestNews&article=62
Saw that last week,was trying to get some higher res photos but no luck !
[OPCSRi]
30th January 2011, 12:19 AM
Great result and a great little race car guys.
poita
25th May 2011, 07:10 PM
Hows the rocket doing?
Nurb608
25th May 2011, 08:50 PM
Hows the rocket doing?
I think theyre at Philip island this weekend?
edit:- Yup
Entry List for 6 hour
Class A
Pollicina - Evo IX RS
Wilson Brothers - STI 05
TMR Australia - Evo X RS
Thomas - Evo IX RS
Class B
Robinson - FPV FG F6
Morcom - BMW 335i
GWS - BMW 335i
Mathew Holt - HSV VZ GTS
Class C
Osborne - MPS 3
Osborne - MPS 3
GWS - BMW 130i
GWS - BMW 130i
Grand Prix MPS 3
Racer Industries - HSV VXR
Class D
Kirkham - Fiesta XR4
Keene - Mini Cooper S
Gray - Corolla Sportivo
Gartner - Renault Clio
McGill - Toyota Celica
Class E
Gray - Toyota Echo
Pedders - Proton Satria
Class I
Brendon Cook - Mini JCW
Beric Lynton - Mini JCW
Nurb608
3rd October 2011, 06:27 PM
Congrats to Ryan and the guys on an 11th outright at Britcar on the weekend!
http://i597.photobucket.com/albums/tt57/nurb608/Veccy%20C/Cars/312787_224070764321344_100001552670529_628156_4600 29089_n.jpg
http://i597.photobucket.com/albums/tt57/nurb608/Veccy%20C/Cars/302142_280578065299365_100000415212815_1074512_177 192724_n.jpg
http://i597.photobucket.com/albums/tt57/nurb608/Veccy%20C/Cars/300340_280575205299651_100000415212815_1074438_131 4006802_n.jpg
http://i597.photobucket.com/albums/tt57/nurb608/Veccy%20C/Cars/297788_280572121966626_100000415212815_1074430_461 543130_n.jpg
http://i597.photobucket.com/albums/tt57/nurb608/Veccy%20C/Cars/297348_280573318633173_100000415212815_1074432_190 4956700_n.jpg
Thanks to Jonathan Shield over in the UK for the pit pics!
All results here for anyone interested http://www.britcar24hr.co.uk/cms/e107_plugins/content/files/timings/2011/SILV24HR/Silverstone_Britcar_24HR_113963.pdf
gman
3rd October 2011, 06:30 PM
Nice work...
Nurb608
3rd October 2011, 06:35 PM
Nice work...
I want his body kit lol.
gman
3rd October 2011, 06:39 PM
I know where you can get the bonnet vent from.. ;)
But yeah it looks v.nice!!
Nurb608
3rd October 2011, 06:49 PM
Subaru? lol
kabel
3rd October 2011, 09:34 PM
Great result !
CNBLU
4th October 2011, 10:32 AM
That car is porn, love the kit
gman
4th October 2011, 11:07 AM
Subaru? lol
Made for as universal fit by a UK company, Carbon Mods.
Nurb608
16th October 2011, 12:39 PM
Good pic and not so good vid of the car catching fire at Catalunya a few weeks ago!
http://i597.photobucket.com/albums/tt57/nurb608/Veccy%20C/Cars/1b0854f0dc068742d45d1fdd8b812a2c_o.jpg
http://www.youtube.com/watch?v=JVzEwhlRVFc
metry
16th October 2011, 01:39 PM
:( thats sad. did they figure out what caused the fire?
Nurb608
16th October 2011, 01:44 PM
:( thats sad. did they figure out what caused the fire?
Not 100% sure, but they did great work getting it all fixed up for the Britcar 24hr. Just saw that 4 driveshaft changes were required for that event too and they still came in with an awesome result!
Powered by vBulletin® Version 4.2.4 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.