hid xenon

[vectra_]

hi everyone :)

im looking at these for my headlights

http://www.hids-direct.co.uk/hid-conversion-kits-50w/vauxhall-hid-kits/50w-vauxhall-hid-conversion-kits-p-445.html

and these ones for my fogs

http://www.hids-direct.co.uk/hid-conversion-kits-50w/h1h3h7h1190059006-hid-kits/supervision-50w-single-beam-hid-kits-p-283.html

what should i select for the fog lights?

and do i need to change the side lights?would it look bad if i dont ? :/

[vectra_]

anyone ? :s

[ChrisMaz]

I'm probably 60% sure its H7's same as the headlights. But ask on the Veccy-C forums. Basically every facelift owner has them.

[vectra_]

i thought it was h3 :/

[vectra_]

I'm probably 60% sure its H7's same as the headlights. But ask on the Veccy-C forums. Basically every facelift owner has them.

just checked from veccy-c forum they said its h3 for the fogs..

[vectra_]

veccy-c guys told me to buy it from here : http://www.hids4us.com/index.php?route=common/home

also im after angel eyes as well, do i need to change the whole headlight or ?

[vectra_]

recieved this email, can you guys look at it and confirm that everythings right..

Hi,
You will need a H7 premium can-bus kit for your cars low beam...
http://www.hids4us.com/index.php?route=product/product&path=36_38&product_id=69
These for the high beam...
http://www.hids4us.com/index.php?route=product/product&path=49_54&product_id=113
For the foglights...
http://www.hids4us.com/index.php?route=product/product&path=42_53&product_id=117
And these for the sidelights...
http://www.hids4us.com/index.php?route=product/product&path=42_43&product_id=92
Please consult your owners manual to confirm the bulb fitment before ordering.
Regards,
HIDS4US Customer Services
E-mail: [email protected]
Web: www.hids4us.co.uk (http://www.hids4us.co.uk/)
HIDS4US DISCLAIMER

[Nurb608]

They look about right, however i would strongly advise against the use of HID's in your High Beam due to how long they take to warm up. They are not instant like your current high beams which means if you need to use them straight away you'll be in trouble.

[vectra_]

They look about right, however i would strongly advise against the use of HID's in your High Beam due to how long they take to warm up. They are not instant like your current high beams which means if you need to use them straight away you'll be in trouble.
your right..no point of buying the high beams....

so im buying all the stuff that he sent me in the mail instead of the high beams..

[vectra_]

is there an h

[vectra_]

is there an how to on fitting hids ?
i went to autobahn to get it fitted, they said 140$ just to fitted in... ?? :S

[Nurb608]

The instructions should be in with the hids, but basically all you do is attach the looms together, take out the original globe and plug the spade ends from the loom into the light fitting then fit in the hid.

[Rhino]

I thought you could only use HIDs in projector headlights?

[Nurb608]

I thought you could only use HIDs in projector headlights?

Veccy C lights are projectors ;)

[sooty]

Veccy C lights are projectors ;)

And how about those headlight washers :p

[Rhino]

Veccy C lights are projectors ;)

Sorry, yeah, they sold them for Mk 4 Astra as well.

[stevedee3]

And how about those headlight washers :pAnd self-levelling device...

[Nurb608]

And how about those headlight washers :p

The what nows? :p

[Nurb608]

And self-levelling device...

Them too ;) But considering there are soft 4wd's running around with them blinding everyone a car the doesn't shouldn't be done for them IMO