PDA

View Full Version : x16xe turbo set up



Aditi
30th April 2010, 02:58 PM
Hi,
i have heard some statement, that's a standard x16xe engine can deal whit
Low boost pressure very nicely

at first i thought that because the high compression ratio (10.5:1)
it will be very dangerous to the engine! and the F15 gearbox will not be able to deal whit more than 150Nm.

Afterwards its clarified that the F17 gearbox can be replace and fits exactly to the x16 block.
and the engine can deal up to 0.6-0.7 max boost pressure at most!
on a strandete close engine, without replacing pistons, rods, etc.

Does anybody know of any project threads at all relating to this kind of mod?
i'm considering to do this kind of turbo set up in my tigra

boorny88
30th April 2010, 03:06 PM
welcome to the forum and i havent heard of any of this being done to a tigra u might wanna try the UK forums

auzvectra
30th April 2010, 06:04 PM
same engine as kimme's. but u dont want to read her thread, it hasnt been finished yet and just copped catastrophic engine failure :(.

Aditi
30th April 2010, 06:55 PM
I'm quite new Member, remember :wink5:

how is kimme's ? and why Her engine was destroyed ?!
because the turbo set up ? or Other reasons ?

Now the curiosity kills :arf:

gmonkey
30th April 2010, 07:01 PM
running low psi on ur engine will have big gains.. u will be pushing out power easier at low psi than an engine thats made for turbo.. but yes too much PSi = harmful...

auzvectra
30th April 2010, 07:16 PM
kimme's thread is titled "it's finished" or something along those line, u should see it in the new posts search every now n then, it's still active.

they are quite a strong bottom end, have seen personally :).

Aditi
30th April 2010, 07:46 PM
http://www.opelaus.com/forums/showthread.php?24911-She-s-finished!

Thanks, found it.