c20xe/let cams

[auzvectra]

just wondering if any1 has physically tried to fit these cams into the z20let head?

it must be possible, some clet guys have used zlet heads.

or does any1 have some of these cams sitting round that i can try??

i can get beta cams for the clet, then i can for the zlet is all :D.

[Nurb608]

I thought Gav had one of these cams in (C20XE), although could be wrong.

[glider]

well if you want to try them, I have a spare c20let inlet cam and c20xe exhaust lying around ;)

[auzvectra]

well if you want to try them, I have a spare c20let inlet cam and c20xe exhaust lying around ;)

funny thing is, i was talkin to u via pm bout the cali as i was typing this thread n didnt even think of u, hahahaha.

yeh that would be perfect ;).

gav has the X20xev cam in his ;).

[Nurb608]

funny thing is, i was talkin to u via pm bout the cali as i was typing this thread n didnt even think of u, hahahaha.

yeh that would be perfect ;).

gav has the X20xev cam in his ;).

Ah, knew it was something around that era, lol

[poita]

i have inlet/exhaust for x20xev spare here if you want to try that also mate.

although if you can get ones for c20xe will be a better way to go

[auzvectra]

i have inlet/exhaust for x20xev spare here if you want to try that also mate.

although if you can get ones for c20xe will be a better way to go

thanks pete, but got the c22sel 1's in now, dey d same as x20xev ;).
i'm lookin for ph3-4 cams :D.

[poita]

np mate

[nigelh]

I thought that the z and x engines run a different cam sensor pickup to the c engines. Ie the sensor on the c engines is on the back of the exhaust cam while the z and x engines run the pickup near the front.

[auzvectra]

I thought that the z and x engines run a different cam sensor pickup to the c engines. Ie the sensor on the c engines is on the back of the exhaust cam while the z and x engines run the pickup near the front.

well the zlet has timing from the timing gear, and yeah i think the clet/cxe/xxe has a dizzy style on the back of the exhaust cam, but as long as the rest works would be fine.

the cam gears will go on them, as u can use the clet inlet vernier on the zlet, so thats no issue's ;).

[CNBLU]

x20xev cam ftw!!!

[EVLOPL]

I wouldn't worry about the cam angle sensor.
My 20XE is the latest model with Direct ignition (no distributor) these have a cam angle sensor like the X20XEV. I bought some cams from a rally car that was running an older 20XE with a dizzy, so there was no mounting point for the cam angle sensor.
I just drilled a mounting hole in the end of the old model cams with a battery drill and tapped it by hand (not recommended if you have the shakes), the cam angle sensor went on perfect, took 5mins, runs like a dream.
http://i144.photobucket.com/albums/r180/chadbad/9Needsahole.jpg
http://i144.photobucket.com/albums/r180/chadbad/7Scuffing.jpg

[auzvectra]

I wouldn't worry about the cam angle sensor.
My 20XE is the latest model with Direct ignition (no distributor) these have a cam angle sensor like the X20XEV. I bought some cams from a rally car that was running an older 20XE with a dizzy, so there was no mounting point for the cam angle sensor.
I just drilled a mounting hole in the end of the old model cams with a battery drill and tapped it by hand (not recommended if you have the shakes), the cam angle sensor went on perfect, took 5mins, runs like a dream.
http://i144.photobucket.com/albums/r180/chadbad/9Needsahole.jpg
http://i144.photobucket.com/albums/r180/chadbad/7Scuffing.jpg

ne chance u got a pic of the front end of those cams? ;).