View Full Version : Any know a good spray painter/panel beater in BRISBANE
aza28
13th January 2010, 10:28 PM
someone put a nice scratch through my rear passenger door which i want fixed. I also want to colour code my door handles.
Can anyone recommend a good spray painter / panel beater in brisbane.
What should i expect to pay for this? $200-250 for the door? $50 each for the handles?
thanks guys
guy 27
13th January 2010, 10:31 PM
if i had my spray booth in action I could of helped you out.
how deep is the scratch?
Price sounds right for the door but should be a little cheaper for the handles.
(edit: 1000th post)
aza28
13th January 2010, 10:39 PM
not too deep but deep enough to know that i won't be able to polish it out..
guy 27
13th January 2010, 10:43 PM
fair enough. if it has not gone into the base coat it should be relatively cheap then. All they will do is lightly sand it. clear coat and buff. about 2 - 3 hours work max.
aza28
13th January 2010, 10:53 PM
hmmm i'm not sure if it has or not, how can you tell?
guy 27
13th January 2010, 11:18 PM
look at it in day light, the factory primer that is used will be a flat black colour.
can you catch your fingernail on the scratch? If it only lightly catches, chances are it can be machine buffed out.
aza28
14th January 2010, 01:32 PM
the scratch has exposed a silver colour.
and yeh i can catch my fingernail on the scratch.
so can anyone recommend a good spray painter / panel beater in Brisbane?
poita
14th January 2010, 07:07 PM
i dont know any personally, but hear good things about DMD Garage.
you pay for the pleasure though
KiwiSRi
15th January 2010, 06:49 PM
depends what part of brissie you are but john at affordable body works in lawnton (northside) did my paint job he's privately owned so you pay a bit less and he's good
Powered by vBulletin® Version 4.2.4 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.