need some pics of a PWR alloy Rad fitted

[dannysport18]

I am after some pictures of a pwr radiator fitted on a astra Sri turbo
as i want to order one just want to see what the space is like on them fitted in the engine bay
as i need the space for FMIC fitted in pics an Fan in engine bay
it will have to be moved a few mm move forward to give me space


http://i27.photobucket.com/albums/c152/dannyfranks/PA050005.jpg
http://i27.photobucket.com/albums/c152/dannyfranks/P9050049.jpg

[glider]

aza28 has some on his car thread,

http://www.opelaus.com/forum/showthread.php?t=14748

http://i146.photobucket.com/albums/r265/aza28/DSC_1659.jpg

http://i146.photobucket.com/albums/r265/aza28/DSC_1662.jpg

http://i146.photobucket.com/albums/r265/aza28/DSC_1666.jpg

[dannysport18]

what about the Fan in the engine bay ???

[auzvectra]

i belive the pwr is setup for standard fitment, although it is slightly thinner then the stock item. i am pretty sure the stock fan is still used.

[aza28]

yeh, standard fitment. They made just a couple of small changes to the original design to simply it. It's also thinner. Not use what u mean by "as i need the for intercooler an turbo manifold" but it will retain the fan u are talking about (shown in ur pics) and will clear manifold no problem - u will have slightly more room if anything.

[auzvectra]

mind you, slightly more room isnt enough for any turbo other then the stock or vxr :(.
i have about 10mm between my turbo and the radiator, and about the same on the motor side.

[dannysport18]

its the Fan in the engine bay the one with the alloy cover
I am fitting a Dbilas turbo manifold with hybrid vxr turbo
its the new manifold has made me move the Rad's forward a bit so i just wanted to make sure i still have room for Fan in engine bay an Fan on intercooler

[aza28]

advantage of bein from the Uk though is if u want a different setup, guys like Nortech and regal make tubular manifolds for pretty much standard fitment - i know nortech have just designed a new tubular manifold and retains the fan dannysport18 is referring to - thats even with an external wastegate!:)

[aza28]

its the Fan in the engine bay the one with the alloy cover
I am fitting a Dbilas turbo manifold with hybrid vxr turbo

i have a VXR turbo....

that fan is retained and u should have no issues with dbilas manifold and vrx turbo

[dannysport18]

this is the manifold an turbo i have
this is not my car
http://img222.imageshack.us/img222/5420/baydbilasqj4.jpg

[aza28]

it should fit as it is a thinner design, but if you have any concerns, call or email PWR and they'll help u out. Ask for Drew.

[dannysport18]

thanks order sorted will be with me in a few weeks its going to get made this week as a factory order an sent over to uk

[dannysport18]

that was fast they have made it an its now in the uk :)