SSS_Hoon
12th December 2006, 09:45 PM
on the way too work this morning and my clutch stopped working just like that without any warning either, would select any gear at all had too rev match it to change gears. when i was stopped i had to turn it off and start it in gear with my foot on the clutch and it was ok.
actually there were some warnings for some time now the bearing was noisy
got too work at 530am adjusted the cable a bit and felt a bit better as it actually went into 2nd gear now.
left work 1230pm to go pull out the box and see what was wrong with it.i had 2nd gear as long as i didnt take it out of it other then that rev matchng was all the go lots of crunching but i got it to my dads work and that is where it ended as it wouldnt select anything now car running foor on the clutch just metal grinding sounds mm not good.
suspisions were
1)clutch fork broken
2)throw out bearing gone(due to the noise)
3)worn down that much that the rivets had sheared off and the clutch lining broke off.
pictures attached
SSS_Hoon
actually there were some warnings for some time now the bearing was noisy
got too work at 530am adjusted the cable a bit and felt a bit better as it actually went into 2nd gear now.
left work 1230pm to go pull out the box and see what was wrong with it.i had 2nd gear as long as i didnt take it out of it other then that rev matchng was all the go lots of crunching but i got it to my dads work and that is where it ended as it wouldnt select anything now car running foor on the clutch just metal grinding sounds mm not good.
suspisions were
1)clutch fork broken
2)throw out bearing gone(due to the noise)
3)worn down that much that the rivets had sheared off and the clutch lining broke off.
pictures attached
SSS_Hoon